1 / 1
Lamello Zeta P2 C35 Vacuum attachment (Click and Clean)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Most of my tools use the BOSCH click and clean adapter, so I had to design an adapter for my Lamello
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 500
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
This adapter just substitutes the original hose connection of the Lamello Zeta P2, so you can use the BOSCH click and clean hose.
I printed it in ASA Prusament with 4 outer perimeters, 0.4mm nozzle, 0.2mm structural profile.
Printing orientation (no support should be needed):
