1 / 6
Alte Vakuum Bohrstaubabsaugung für das Kärcher C35 System / old vacuum drill dust extractor for the Kärcher C35 system
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this attatchment for your Kärcher or Bosch Professional vacuum you can drill clean holes in Walls.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 201
- Wydruki
- 0
- Wyświetlenia
- 2069
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (53)Powiązane
I used the predesigned connector von Boschlike over on Thingiverse:
https://www.thingiverse.com/thing:4845838
Also the original uploadlink on Thiniverse is:
https://www.thingiverse.com/thing:4862299
If you have a problem with loosing grip there is a groove in wich you can put some silicon.
There is a new Version of this allready out there under: https://www.printables.com/model/267112-selfholding-drilling-dust-vaccum-attatchment-for-k