1 / 5
Bosch/Kärcher C35 male adapter for 32mm hose
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the male Bosch/Kärcher C35 adapter for a standard 32mm vacuum hose. Optional with an endcap.
- Ocena
- 4,8 / 5
- Polubienia
- 48
- Pobrania
- 529
- Wydruki
- 5
- Wyświetlenia
- 2854
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 5) (Komentarze: 10)Remiksy (2)Kolekcje (114)Powiązane
This is the male Bosch/Kärcher C35 adapter for a standard 32mm vacuum hose.
Printorientation doesn't really matter. You should print a couple of spare clips.
Sometimes you need to tweak it a lillte bit by scaling it in x and y by up to +-1,5%
UPDATE 24.06.2023:
I've uploaded a “new” Version of the adapter, where you can fit an additional part to tie down the Endcap, with a cord.
To seal the endcap against the adapter I've used this technique from Cosmas. As a cord I've used 3,2mm PP cord.