1 / 2
Underwater Stacking Tower Game Block (like Jenga)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Underwater Stacking Tower Game Block (like Jenga)
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 597
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (14)Powiązane
This is a block for a Jenga-like stacking tower game intended for under water use. Each block uses a M8 bolt and nut to add weight to it.
Playing the game while in scuba gear in a pool is fun and also a great training exercise for trim, buoyancy, and swimming backwards.
For a complete game you will need:
- 54 blocks
- 54 M8 x 80 cylindrical head screws (DIN 912, stainless recommended)
- 54 M8 nuts (DIN 934, stainless recommended)
Printing instructions:
- 0.2mm layer height (the bolt holes are optimized for it!)
- 0.45mm extrusion width and 3 perimeters/walls (the wall thickness is optimized for it!)
- 100% infill is recommended to avoid water entry into the nut/bolt head sections, but it's not a must.
- use a material that offers the needed chemical and UV resistance and a low friction coefficient. I recommend PETG. PLA is not recommended.