1 / 2
Underwater Stacking Tower Game Block (like Jenga)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Underwater Stacking Tower Game Block (like Jenga)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 85
- Makes
- 1
- Views
- 609
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a block for a Jenga-like stacking tower game intended for under water use. Each block uses a M8 bolt and nut to add weight to it.
Playing the game while in scuba gear in a pool is fun and also a great training exercise for trim, buoyancy, and swimming backwards.
For a complete game you will need:
- 54 blocks
- 54 M8 x 80 cylindrical head screws (DIN 912, stainless recommended)
- 54 M8 nuts (DIN 934, stainless recommended)
Printing instructions:
- 0.2mm layer height (the bolt holes are optimized for it!)
- 0.45mm extrusion width and 3 perimeters/walls (the wall thickness is optimized for it!)
- 100% infill is recommended to avoid water entry into the nut/bolt head sections, but it's not a must.
- use a material that offers the needed chemical and UV resistance and a low friction coefficient. I recommend PETG. PLA is not recommended.