Honeycomb (HSW) Wowstick Screwdriver and Bits (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Freecad model for holding 4mm bits, a Wowstick and a manual screwdriver handle for precision bits.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 2
- Wyświetlenia
- 266
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to attach my Wowstick as well as a manual handle for the precision screwdriver bits to my honeycomb storage wall.
I added the FreeCAD file. The spredsheet has explaining hints. Beware, I cannot guarantee that all combinations are stable…
You can change the diameter of the tools in the back of the box. This will automatcally expand the box in depth. You can insert more holes for the bitson the front. That makes the whole box wider. And also, you can stack mor rows of bits. That would make the box taller.
The filament seems of rather poor quality (was also very cheap) and I printed quite fast. But that fits for me.
I used an Anycubic Kobra 2 with 0.4 Nozzle and PLA.
I did not use supports, as these 30° overhang is OK for my Printer-Filament combo. When you change the angle of the bitrow Faces, the overhang depends on that. Keep that in mind.
Just one thing: Use a proper infill. I used lightning and that does not well support the HSW plugs. I suggest Gyroid with 10 to 20 %. Otherwise the plugs will bend into the box.
