Littlest Pet Shop Head Peg Part Fix (Large)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A piece to fix the neck of a littlest pet shop toy / collectible.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model to fix a littlest pet shop toy/collectible as the ones we had, the inner plastic piece that holds the body to the head broke. This replacement part will fit in the hole of the head of the littlest pet shop. This one specifically is the bigger version of the two. While there's other models that are supposed to replace this part, this one strives to be as accurate as the original one in dimensions.
The finished result will feel similar to the original part but depending on the spring used, it might be stiffer to rotate.
Please let me know on the comments so I can make any adjustments to the model.
I printed these at 0.16mm without a problem. I recommend printing it as is (hole pointing the bed/down) and using supports for better overhangs so it prints accurately. 15% of infill seems to be sturdy and resourceful enough.