20mm Suleve Corner for 2020 Extrusion (HyperCube)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner piece to join 2020 aluminium extrusion
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 189
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Tech2C's HyperCube 3D printer specifies to purchase Suleve corner brackets from Banggood, however of the 5 bags I ordered, 3 bags were made with such poor quality they simply could not be used. The remainder of the corners are not perfect but they do work when tied together with other supports outside the frame.
Honestly if your existing printer can print even remotely straight, I think that printing corners in PLA would be better than buying yet another bunch of poorly made rubbish from Banggood.
This part is the same outside dimensions and thickness as the Suleve corners in the HyperCube BOM, however I have shrunk the bolt hole to accept M5 only, and located the hole at the end instead of in a slot like the metal corners. Artur suggests this is the best place for the bolt anyway, in his HyperCube/Printrbot videos on YouTube.
OpenSCAD source is included if you wish to modify the part.