1 / 1
FilarworKs Master Spool Remix: Label area & smaller width for spool core — zdjęcie 1

FilarworKs Master Spool Remix: Label area & smaller width for spool core

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Added area for labels to the large spools and added a thinner core/spacer to allow for thinner spools.

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
107
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

I like the modular design of FilarworKs Master Spool, but for me it was lacking some features.

  1. I wanted an area to stick a label to without it being unsupported at large portions
  2. My refill-filament was too wide for the standard measurement (+ one spacer) and I didn't want to extend it by two whole spacers (too wide for my storage), so I added a half-sized one (Espaciador12.5mm.stl)
  3. The alignment for the parts was not ideal. When the slots for the cable ties were aligned, the connection between the parts was very loose, easily unscrewing itself during printing. Screwing the threads tightly together caused the slots to no longer be aligned (not a technical problem but my OCD kicked in ;) ). That is what the alignment_spacer_ring is for.
    I printed it in several thicknesses (0.1, 0.15, 0.2, 0.25 & 0.3 mm) and used what worked best.