#0191 Thermocouple Protective Case V2 [Protective Ring]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V2 of my thermocouple case that uses much less material.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 52
- Wydruki
- 2
- Wyświetlenia
- 192
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, effort, and CAFFEINE! ;-)
And then check out my other models for something else you might like!
**********
The original thermocouple protective case worked well for my 30AWG thermocouple wires (by Omega) but a recent project had me making a bunch more thermocouples which helped me realize that the case needs to be more material-efficient (use less material). This V2 version is just a ring with an area to park the prongs of the connector. Alternatively, you can still use it for wires with a loose end as well (for hard-wiring into your data acquisition system).
Designed for a range of jacket sizes for 30AWG (0.255mm dia) solid thermocouple wires:
- 1.3mm dia fiber glass jacket by Omega (30AWG wires).
- 0.8 x 1.2mm cross-section jacket by Minnesota Measurements Instruments LLC (30AWG wires).
- 0.6 x 1.0mm cross-section jacket (source: unknown) - 30AWG wires.
Key Features:
- Uses 57% less material than V1 (with its lid). If you use V1 without the lid (print the base only), you can still save 27% of material.
- The inside of the ring offers naturally good protection against damage of the wire ends without the added lid that V1 has.
- Can accommodate connectorized or non connectorized thermocouple wires (see pics attached) by having 2 slot sizes to park the wire - depending on its diameter.
- Accommodates a larger range of jacket sizes.
- 6 slots for each wire type around the perimeter of the ring to accommodate different wire lengths.
- Can fit 6 feet or more of thermocouple wires, depending on jacket diameter size (fits longer wires for smaller diameter wires.)
- No supports needed.
Printing Recommendations:
- Light duty model - great for PLA.
- 0.4mm nozzle and 0.2mm layers (also good results with 0.28mm layers).
- Print in different colors to color-code your thermocouple wire types, wire lengths, etc.
**********
If you add this to your collection and/or download the model, please >click< the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!
P.S. Please post some constructive feedback if you'd like to see something improved.
Tags