Casper Glow Charging Base for Stuck Pogo Pins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging base replacement for Casper Glow light to fix stuck charging pin issue, which results in no charging.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Remixed the original to fit the existing board that comes in the charge base. I just removed that and hot glued it into this one. Did this to address the issue with the pogo pins getting stuck and not contacting the light to charge. This design lets the pins sit more “proud” to maintain contact with the light, even if the pins don't pogo anymore.
I did 0.16mm layer height but 0.2mm is probably fine. You will need supports for the underside. Print the cover in TPU if you extra fancy. Included my sloppy CAD additions to cromer's original f3d file - enjoy.