Angled Stand for Epson Projector, Ipad, or Tablet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large stand I made to hold an Epson 2030 projector at an angle (approx. 63deg), for projection onto the ceiling.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A very sturdy stand I made to hold an Epson 2030 projector at an angle (approximately 63 degrees), for projection to the ceiling. The stand supports the projector without blocking the HDMI or power plugs. You can add stick-on rubber feet if you want but the weight of the projector will keep the stand from moving around.
It can also be used as a tablet or ipad holder (the latest and greatest 13" iPad Pro). Or use it to hold an entire ream of paper in front of you as you type. Or two iPhone 18 Pro Max Ultra Platinums (the ones with 8" screens) side by side.
Note: It will NOT currently support the Codex Gigas. So please don't try. However, if you are very motivated, you could modify the model to give it extra thickness and/or to add rafters, joists, etc. to the model.
Technical Details:
This stand is one-piece, giving it maximum strength and stability. The footprint or base is approximately 8"x8.25". There are no parts you have to fix or glue together. For maximum stability, move the model along the Z axis until the bottom side of the base (footprint) is flush with the Z plane. When printed this way (flushed with the Z axis) with my P1S, the stand doesn't require any support.