Liczymy pasujące modele…
Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
No supports required.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Praktische Abstandshilfe um Bohrungen / Abstände Bitzschnell aufteilen zu können. Es können Bohrungsabstände sehr schnell durch aufziehen der Hilfe aufgeteillt werden. Bauteile halten gut zusammen,sind leichtgängig und sind beliebig…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Descrep supports for the Edifier MR4 speaker set that gives you the option to select from 7 different angles thanks to the little slots in the main support this way you can find the angle best for you.
Wydruk około 3,36 €–4,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There already is a plethora of raspberry pi cases on the internet and the last thing we need is yet another one ... well - I created one anyway ... because I wanted to and I had a lot of fun doing it :-). I tried to achieve the following…
This sculpture can be scaled and printed in pairs or alone. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
The “Silly Stands” are Nerf blaster display stands for blasters using the Talon magazine geometry variants (Straight, Angled, Slim Angled)! There are 6 versions. There are three types of mag (Straight Talon, Angled Talon, and Slim Angled…
Two simple stands for keeping Perplexus puzzles from rolling around. 110mm: Perplexus Go 165mm: Perplexus Rookie 175mm: Perplexus Original 200mm: Perplexus Epic I added felt pads to keep the ball from getting scratched, but this is not…
3D Printed Target Stands for Outdoor use UPDATE: Tweaked model for printablility Includes two variants for use with either stamped steel tent stakes or for 6-inch 60D nails. Bill of Materials: 1x Target Stand 2x tent stakes OR nails 1…
I got some cool new speakers for Christmas, but they were much bigger than I anticipated. So it was necessary to lay them on their sides. However, given their proximity to me on the desk, their elevation was less than ideal. So I designed…
Step 1: Decide how you want to mount your display stand. Free standing - skip to the next step Wall mounted - download and print the “Wall mount mounting slide” from the “mounting slides” folder below. Attach to your wall with appropriate…
In use you can hardly spot them:
Edifier M60 Desktop Speaker Stands - 16° Angled Design Custom replacement stands for Edifier M60 desktop speakers that solve the aesthetic mismatch of the original aluminum profiles on modern desks. What This Is These are direct…
A headphone stand in 4 different designs. The designs can be downloaded as solid, with round retro holes, hollowed out or minimalist as a skeleton. All edges are rounded and feel good after printing. The top is the same for all designs…
At 50 downloads, I will add 2 new stands.
I wanted these sensors to just sit on my desk, various parts of the house etc. On a simple stand. Printed this with three different angles: 60° for a low desk, 75° for a high shelf and 10° for hanging. All have a screw slot. Note that…
Brings tweeter closer to ear level Reduces bass vibration of desk/floor (improves clarity and transmission for neighbors) Slot for cable tie to clean up cords Parts Foot & mat: print with TPU, 25% gyroid infill Body: I printed mine in…
Abstandhalter für Stofftöpfe gegen Wasseransammlungen im Untersetzer oder um die Höhe nach Bedarf anzupassen. Design für Untersetzer mit Innendurchmesser 210 mm Die Abstandhalter können beliebig erhöht werden und durch den Nubsi sollten…
First contest entry. :) Designed on iPad Pro in Shapr3D.
AUDIOENGINE 2+ SPEAKER STANDS A simple and easy printable speaker stands for angeling your favorite speakers when they are a little bit lower than they should be. I designed 3 different versions, all with the same dimensions but different…
A fun project we did for school where the kids needed to build "Math Figures" for a Math-themed board game.
This model is a painting staining stand designed so that you don't have to miss any spots while spraying, and so that you don't set a wet side on your surface and ruin your paint job. Its about 6.25 inches wide and 8 inches long (between…
Assemble a colorful pencil storage tower of the height you need Remember to weight the bottom of the tower to make it stable You can permanently glue the stand in the chosen place, then you don't need weights. Assemble the tower from…
Simple stands with bearings for prusament spools.
After more plays of the board game Voidfall I have revised my Player Tech stands for the triple-layered House boards with three improvements: Table space is at a premium in this game, so the right Player Tech stand now has a slot to put…
Table toy, simple and cute rotation stand for mini filament spools. I made it for different amounts of spools, for 2, 3 and 4.
These are stands and tools to work on your aprilia SR50 fuel pumps! The round part with the square hole can be used to lightly tap down on the fuel pump cover to help work in some silicone lubricant for removal. The stands just help you…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
Two small stands that holds the drinkmate half liter (0.5L) bottle upside down to dry, and holds the drinkmate fizz infuser along side it. Heavy version also supports the bottle neck and uses around 55g of filament. The bottle is held a…
Simple stands to lift a StarTech network rack up off the floor.
Some material sample stands. Made for propping up samples in a light booth for color verification. With markings for different angles of the sample. 70°, 55° and 45° on the front, and the rear has a 90° surface.
Use this to show off your invincible compendium books with awesomeness, I will post a real picture of usage with the book and this, I made this in blender for my first ever make on printables
7 inch stands designed for Edifier m60 speakers 100mm x 147mm platform Adhesive foam stuck to the bottom of the base to dampen vibrations and increase grip. I used this Parts were modeled with holes to glue in 6x3mm magnets, but they are…
Some models I made for DCeased I never got around to printing/testing. Print at your own risk. But I don't see any reason why they won't work fine just like these Marvel spawn token stands:
I printed my version in Resin so the tolerances might be a little of for FDM.
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
The screw holes are intended to be used with the SSD screws that come with Ridge. This way you can screw it at any point you have ventilation holes.
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
I didn't want to mount my AP to the wall so I designed these simple legs/stands Just print 2 of them and screw them into the mounting bracket included in the box for the AP. You can use the M3 screws provided with the AP.
These Card Stands are ideal for any card game that requires you to hold a lot of cards (Uno, Five Crowns, etc.) or for people that have trouble holding cards (children, elderly, arthritis, etc.). The Stands and Trays efficiently nest…
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
I have created these models for tubes I had of various sizes. I will add more if / when I create them. These print easily out of PLA. I used a nice copper colored Overture Silk PLA.
Alle Seiten der „Pyramide" sind gleich lang, somit ist ein Ausrichten nicht notwendig. All sides of the “pyramid” are the same length, so alignment is not necessary.
This model is a painting staining stand designed so that you don't have to miss any spots while spraying, and so that you don't set a wet side on your surface and ruin your paint job. Its about 6.25 inches wide and 8 inches long (between…
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
This one looks better without the flat base. Without the base the stand badly warps and becomes unusable. Especially with the Borg Cube being such a heavy model. The connector on the top is a cone to make a better fit. The models these…
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
The top part which connects to the spaceship is quite weak. I've reinforced it numerous times to the point it's almost double the width of my original design. it can't be made any bigger without ruining the style. The connector on the top…
The connector on the top is a cone to make a better fit. The models these are meant for get work down and deform over the years. By using a cone, there's less surface area but it will grab the ship better. It can always be sanded down for…
I have made extra stands, with a thin base, since I don't use the box Two versions of every stands are provided: one with standard axe clearances, the other with looser axe clearances An alternate version of the pin is provided, also with…
I am having issues with my printer and cheap filament and I'm using the last of the ABS I have in the color she wants. I would suggest printing in a easier to work with filament such as PLA or PETG so that you will not need brim like I do…
Side stands for the NTS-2 oscilloscope kit from KORG. These sides are modelled after the drawing in the booklet provided by KORG. Very handy to set the oscilloscope so that it's easier to see.
3 different RC Car crawler stands depending on car link distance Aim: Easy printable material efficient stand Good simplicity and stability ratio Minimal wheel to ground distance (when falling off the stand) Sufficient to carry maximum…
A pair of these printable 35mm accessory arms lets you attach 35mm C-Stand columns (such as Avenger 2014 silver or black - or similar types) to a leg of your SCHLEPP Camera Cart. A 6082 aluminium alloy version of these arms will be…
These compact desk stands are designed to raise your soundbar by 35 mm , for example to clear the feet of a monitor stand or other obstacles on your desk. They fit soundbars with a maximum width of 62 mm and help improve placement without…
Support for mounting speakers on a PC monitor stand. I have created two versions, one that is more resistant and requires the use of an M4x6 screw (AA064) to be inserted behind the speaker, and another integral version without screws. The…
These stands were originally made for star wars figures, the peg is 3.2mm and the bases are 28mm and 40mm
A mario lucky block themed phone stand and a star wars logo themed phone stand.
Valentine rose with text in stem and named stands to gift for your loved ones
Pot Lid Spacer Description You’ve probably encountered situations while cooking where you want steam to escape from the pot without fully removing the lid. Usually, this is done by placing a spoon between the pot and the lid. For me, this…
I bought a Kobo remote for my Kobo Libra 2 colour. A great thing to own, but awkward to carry and easily forgotten when heading out on a trip. So I made this all in one carry solution. It is over engineered as a simple case, but I wanted…
Recently opened up some Energon Universe Kayou trading card packs and got theses impressive logo-shaped lenticular transformers cards! Thought they would look great as standee pieces for the collection, so here we are! These stands allow…
I made this heart for Valentine's Day, and it lies flat on the table, so it doesn't need any support. The heart is movable, which will bring warmth to the person you print it for. I printed using PLA at a layer height of 0.20 mm Please…
Connector for wooden plant stand. Offers additional directions for connection. Recommend not hammering, but pushing instead. May have to scale model for the wood that comes with your stand. Drill holes added for optional screws.
IPAD 10. / 10th generation (2022) Wandhalterung - wall mount - 10,9" (27,69 cm Diagonale) abgerundete Ecken nur VESA 100 Bohrung 15 mm Wandabstand Modell zum Druck hochkant stellen (also auf die kurze Seite wo die Blende für das…
stand holder model is with intergretated support (disable it in your slicer) cf photo
After more plays of the board game Voidfall I have revised my Player Tech stands for the triple-layered House boards with three improvements: Table space is at a premium in this game, so the right Player Tech stand now has a slot to put…
I printed these for a wedding. The version that has many fine details can be tricky... try the others first. Printed with marble PLA at max bed size. These are made from the same base as my other Flutted Trash and Vase.
Why I Created This Organizing sheet music with a tablet is great, but paper sheet music is usually handed out during rehearsals. With this holder, paper sheet music can now also be placed on a tablet stand. Assembly You will need an M3…
If you have a Dell soundbar AC511, you can use it without a compatible monitor, just as a standalone soundbar. Print at 10-15% infill. I used cork padding to avoid sliding. No supports required, easy print. Made in Freecad.
This piece connects the two stands from the Aixun T3A ( https://s.click.aliexpress.com/e/_c3dRBPjH or https://amzn.to/3QZmkgo ) and T3B ( https://s.click.aliexpress.com/e/_c3ODuVJl or https://amzn.to/4d6iHwA ) soldering stations together…
This is a model i modded for Josh-3D's eurorack case which i kept as true to the original as i could. I only had to modify the mounting holes and add a small cut out on the back. These are mounts that let you attach to the side panels…
Knob has a hole with 6.5 mm diameter. I printed and covered them with some thick layers of clear spray paint for inreased dirt resistance. ;) Secured them with a drop of epoxy
2 different stands for Sonoff SNZB-02LD thermometer with probe. 1st one is table stand and 2nd one is for rimless 5mm glass aquarium. Sensor goes in with pressing it in and there is hole in the back to push the thermometer back out for…
Grab your favourite shape and scale it in your slicer to fit your balls size. The default size is made to fit spheres having 5cm in diameter. So far basic shapes mostly. I will play around and try to create more decorative pieces as well.
🐈Six silhouettes of cats, original drawings by Roberta Pagnoni.🐈 It comes in two versions: full or outlines. Recommended to print the outlines using an extruder with a maximum diameter of 0.4 mm. Can be used as placeholders on tables or…
I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…
These are different stands for my Horizon Zero Dawn board game deck plates. They can be used to stack the plates and tilt them slightly. This way, they take up less space on the table and make it easier for everyone to see them. You need…
Two small stands that holds the drinkmate half liter (0.5L) bottle upside down to dry, and holds the drinkmate fizz infuser along side it. Heavy version also supports the bottle neck and uses around 55g of filament. The bottle is held a…
Stands with displays badge and clamp fitted with 5mm foam inserts to hold and protect the Martin's 80cm Stargate . You can attach the stands to a plate using four M4 screw holes located under each stand or use the TPU printable socks to…
Multiple stand bases for different displays I used to sell. Circular 240mm was designed for a customer who wanted to display 3 Diana's. The Dual blaster stand was originally designed for a customer to display 2 BK-S1's. The standard stand…
Just a simple headphones stand for mom.
I designed these to give my monitors a an upward tilt. They can also be spun around to create a downward slant if your monitors sit above ear level, as long as the face of your monitor is flat. They're made to be universal. Each one is…
I made these tripods to support objects above my turntable inside my paint spray booth. I previously had a set of three stacking pyramids which were great for large objects but didn't work for small sizes. These work great for smaller…
Stands for the Benelli M4 airsoft shotgun, one of the stands has a hole for the logo to be glued in (the logo is for download as well). The part with the logo holds the magazine tube, the second part holds the stock. Both parts have space…
This model is meant to hold up to (3) sets of MarickH's pipe clamp stands. You can find their model here https://www.printables.com/model/1351401-pony-pipe-clamp-stands Enjoy
Use this to show off your invincible compendium books with awesomeness, I will post a real picture of usage with the book and this, I made this in blender for my first ever make on printables
Made for concrete weight plates to stand on in a row but should work with bumper plates. The plates pictured are from Stix and Stone at Ø17.5" and the stand internal width is 3".
A couple of remixes of https://www.printables.com/model/1226700-lego-f1-speed-champions-display-stand uploaded by 3DMakerNoob . Designed to display a couple of different styles of Non-F1 Lego Speed Champions cars.
Magical Athlete FanMade Grandstands! For all your athletes...even the Huge one. A Grandstand setup that can be put together and broken down to store in the box. Tolerances are tight, the settings below worked for me (AnyCubic Kobra 2…
Didnt print or test out anything yet, just recreated the hardware with some reinforcement. also included are the Fusion360 files. Spots for wood slats are sized for 1.5in. Dips for the ratchet straps are 1in wide. You can find info about…
Cisco Webex Room devices are provided with wall and VESA mount options. Room Kit Plus / QuadCam is wall mount only. No legs for desk or top of display placement are available. I tried to fill the gap and created the legs for both types of…
