Bike / MTB Thru axle / Quick Release adapter for truing stands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple adapter from Thru-Axle to Quick Release for truing stands / MTB / Bike / Gravel, etc...
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I own an old truing stand, which supports Quick Release Wheels only.
Therefore I developed some "dummy thru axles" which can be used as a adapter
for this truing stand. The dummy axles have a handle at one side for a easier insertion/removal.
I added some versions here:
15x100mm (shorter, should work)
15x110mm (tested)
12x142mm (shorter, should work)
12x148mm (tested)
12x157mm (not tested)
The Axles can be printed upstanding on the handle, I've printed them with a brim.
print parameters:
PETG
4 walls
20% infill, gyroid
For the 15mm versions, Tree support may be helpful