Bike / MTB Thru axle / Quick Release adapter for truing stands
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.44 – €2.98 net (excluding VAT)
For file: thruaxles_110x15mm_148x12mm_0.4n_0.25mm_PETG_COREONE_2h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.71 excluding VAT (range midpoint).
- Weight reported by the author
- 42 g
- Print time reported by the author
- 2.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
simple adapter from Thru-Axle to Quick Release for truing stands / MTB / Bike / Gravel, etc...
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I own an old truing stand, which supports Quick Release Wheels only.
Therefore I developed some "dummy thru axles" which can be used as a adapter
for this truing stand. The dummy axles have a handle at one side for a easier insertion/removal.
I added some versions here:
15x100mm (shorter, should work)
15x110mm (tested)
12x142mm (shorter, should work)
12x148mm (tested)
12x157mm (not tested)
The Axles can be printed upstanding on the handle, I've printed them with a brim.
print parameters:
PETG
4 walls
20% infill, gyroid
For the 15mm versions, Tree support may be helpful