Stands for Martin's 80cm Stargate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stands with displays badge and clamp fitted with foam inserts to hold and protect the Martin's 80cm Stargate.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stands with displays badge and clamp fitted with 5mm foam inserts to hold and protect the Martin's 80cm Stargate.
You can attach the stands to a plate using four M4 screw holes located under each stand or use the TPU printable socks to prevent the stand from slipping on the floor.
Four display badges (for best results, print with a 0.2 mm nozzle and the ironing setting):
Addresses of the gates to Earth, Abydos, Atlantis, and Destiny.
Stargate in ancient symbols (Astria Porta), in English and Egyptian (from the movie).
Same Stargate but with an Earth button (if needed for electronics, to be used with a 6x6x4.5mm switch button).
A blank display stand for customization.
For electronics, each stand is available in a version with a hole at the back for the female DC power connector or simply to pass the power cable through to the gate.
There are also simpler stands without inserts for display badges.