1 / 3
Bar/Arm for 35mm poles, stands and C-Stand Columns, Display Bar — zdjęcie 1
1 / 3

Bar/Arm for 35mm poles, stands and C-Stand Columns, Display Bar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A pair of those bars/arms allows you to attach 35mm poles to your SCHLEPP Camera Cart.

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
67
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A pair of these printable 35mm accessory arms lets you attach 35mm C-Stand columns (such as Avenger 2014 silver or black - or similar types) to a leg of your SCHLEPP Camera Cart.

A 6082 aluminium alloy version of these arms will be available in Summer 2026 on

https://schleppcarts.com

Depending on the print quality and material, loads of up to 8-10 KG are possible (set of 2 bars).

Think lightweight, when choosing a pole or column. Our recommendation is the Avenger 2014 black (see below). Accessories should be attached as closely to the pole or column as possible. Any accessory acts as a top heavy lever and will effect the stability of your cart operation. 

We assume no liability for the stability and functionality, as the stability of the part is highly dependent on your print quality and how it is used.

PRINTING: 

  • we recommend PA6 or PA12 for printing, full infill. We did prototypes with PLA+ and PETG for great results with a 5 KG EIZO 24" display. Nylon (PA6 or PA12)  will improve the stability of your bars massively. 

  • always ensure all locking levers are securely tightened before attaching heavy accessories

  • check stability of arms from time to time

ADDITIONALLY REQUIRED:

  • 4x Clamping Lever M8x20 (with rotatable lever), example: https://amzn.eu/d/gJC6M1q

  • 4x M8 nut

  • 4x M8 Washers (place between levers and printed arms)

THIRD PARTY HARDWARE: 

USE:

  • when mounting the arms to your Cart, make sure to use the maximum distance between the two arms, at least 15-20 cm

  • do your own testing testing before attaching accessories

  • before attaching accessories, always use counterweight on the base: before attaching accessories or monitors, a counterweight (e.g. a portable power station) must be placed on the base. For safe operation, we recommend a counterweight of at least 2.5 times the combined weight of the C-stand pole and all attached accessories (e.g. display)

  • keep heavy accessories like displays as close to the cart base as possible (center of gravity)

  • always lower the monitor or other accessories, when moving the cart

  • move carefully with a display or large or heavier accessories attached