Bar/Arm for 35mm poles, stands and C-Stand Columns, Display Bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pair of those bars/arms allows you to attach 35mm poles to your SCHLEPP Camera Cart.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A pair of these printable 35mm accessory arms lets you attach 35mm C-Stand columns (such as Avenger 2014 silver or black - or similar types) to a leg of your SCHLEPP Camera Cart.
A 6082 aluminium alloy version of these arms will be available in Summer 2026 on
Depending on the print quality and material, loads of up to 8-10 KG are possible (set of 2 bars).
Think lightweight, when choosing a pole or column. Our recommendation is the Avenger 2014 black (see below). Accessories should be attached as closely to the pole or column as possible. Any accessory acts as a top heavy lever and will effect the stability of your cart operation.
We assume no liability for the stability and functionality, as the stability of the part is highly dependent on your print quality and how it is used.
PRINTING:
we recommend PA6 or PA12 for printing, full infill. We did prototypes with PLA+ and PETG for great results with a 5 KG EIZO 24" display. Nylon (PA6 or PA12) will improve the stability of your bars massively.
always ensure all locking levers are securely tightened before attaching heavy accessories
check stability of arms from time to time
ADDITIONALLY REQUIRED:
4x Clamping Lever M8x20 (with rotatable lever), example: https://amzn.eu/d/gJC6M1q
4x M8 nut
4x M8 Washers (place between levers and printed arms)
THIRD PARTY HARDWARE:
C-Stand pole or similar (recommendation: Avenger 2014 silver or black) https://www.manfrotto.com/global-en/c-stand-column-14-a2014cb/ or https://www.thomann.de/de/avenger_a2014cb_c_stand_column_14.htm
VESA Monitor mount (recommendation: NEEWER MA 016, example: https://amzn.eu/d/ibdqTHJ or https://www.bhphotovideo.com/c/product/1838877-REG/neewer_66605289_heavy_duty_vesa_monitor_mount.html
USE:
when mounting the arms to your Cart, make sure to use the maximum distance between the two arms, at least 15-20 cm
do your own testing testing before attaching accessories
before attaching accessories, always use counterweight on the base: before attaching accessories or monitors, a counterweight (e.g. a portable power station) must be placed on the base. For safe operation, we recommend a counterweight of at least 2.5 times the combined weight of the C-stand pole and all attached accessories (e.g. display)
keep heavy accessories like displays as close to the cart base as possible (center of gravity)
always lower the monitor or other accessories, when moving the cart
move carefully with a display or large or heavier accessories attached