SV08 K1 Hotend Swap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod to utilize K1 series hotend on Sovol SV08
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 1740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This thing work as is but I still have to add assembly instructions so consider this a WIP.
Improvements might also come along the way, I'm planning on making a less naked version of it.
This mod allows you to install Creality K1 series hotend along with two small mirrored blowers.
For that you need a full K1 hotend along with heatsink and 3010 fan, an extra 30x30 blower with the same spec as the stock one and a few metal inserts (will list in the future).
The instalation is super simple, the hardest part beeing soldering the K1 heating element beacuse the cable is too short and also the connector is different.
Key features:
Higher volumetric flow than stock hotend.
Easy to swap and plenty of nozzle options.
Heating element also sold separately and super cheap.
Clear vision of printing area.
Stock probe position.
Lightweight.
IMPORTANT INFO
The frame gear must be printed tough material (recommended CPE or PA12).
It's also important to print with good precision, specially the gear teeth. Extruder must run as smooth as stock. I printed mine on a 0,4 nozzle and works great but I would recommend a 0,2 if you have one.