ULA Atlas V Rocket with Starliner Atop (1:200 Scale)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1:200 scale model of the Atlas V rocket with the Boeing Starliner atop.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This is my first ever design. It is a 1:200 scale ULA Atlas V Model Rocket. It comes with a stand, nameplate, and obviously the parts for the rocket.
You need white & orange filament to print it and it takes about 10 hours to print.
The finished rocket is about 28cm tall and about 2cm diameter.
Video
Here is a video of the assembly process. It's pretty basic, but if you're having trouble its a general idea of how everything fits together.
Known Issues/Pending Updates

There is a pipe that goes along the side of the rocket down by the engines.
I had issues getting this pipe to print as it is so small. So I am working on an update that should make it a part of the rocket and should remove the issues with it printing.
(Also don't mind that it doesn't line up in the images. That is just an artifact of the modeling software not actually a problem with the model)
UPDATE: This has been fixed. There are now two options available. Read below under updates for more information.

I am also working on an update for these side boosters to make the rounded nose cone a part of the side booster so you don't have to print it separate and connect it.
I think this will make it look better once assembled.
Updates

I added an update to the second stage that adds a texture. I have both options available in the downloads, the smooth and textured version.
The texture is slightly exaggerated from the real texture, however in order to see it visibly on the print I had to exaggerate slightly. It should look okay once printed.

I have updated the first stage with 2 options. You can either choose to print the pipe separate, or you can print it with the built in pipe.
The built in pipe is not as accurate looking, however it is definitely easier to print. With the separate pipe, on my printer with a 0.4mm nozzle it was impossible to print because the parts were too small. With a 0.2mm nozzle, the separate parts may work. Although I've not tested this.
If you print it, please post a photo so I can see the results!
If you have any suggestions, please let me know I'd love to make it better. I do have a few updates planned to make some things better in the future.
Also, I am going to try and take some better photos.