Liczymy pasujące modele…
A handle or sleeve with switches to connect to an 18V Ryobi for launching model rockets Instructions Print the parts (one of each except 2X glue rings). Glue the sleeve to the clip plate and reinforce by gluing one ring at the bottom. Use…
GENERAL: 3D file to protect your Eggs in the American Rocketry 2025 Challenge see The American Rocketry Challenge - World's Largest Student Rocket Contest . This year’s ARC challenge has 2 grade A large eggs horizontally mounted in the…
This Egg Capsule is for NRC (NAR) Egg lofting model rocket competition. Previously competition capsules were vacu-formed styrene capsules. Now these are harder to find. This approach offers an alternative that is very close in size with a…
Used in model rocketry to prevent “zippering” or tearing of cardboard tubes during parachute deployment. I printed in TPU. Not sure why you would want it to be rigid, but you could print with anything. I designed it to be used with 3mm…
This is a set of three parts for helping with building your 3 Inch High Power Rocket. This is designed to work with a 3 Fin style rocket, with a 3 inch body tube. This let me epoxy all three fins to the engine mount at the same time and…
Introducing the Rocketry Trophy Mod! Designed to fit those inexpensive participation trophies that just shout WINNER! Just fire up your printer, slap this mod on, and BINGO, you get the first place award to enjoy in the comfort of your…
Model is a high powered rocket electronics bay sled to hold a Eggfinder MiniTX GPS Tracking unit in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. #4 fasteners are required to attached MiniTX…
Model is a high powered rocket electronics bay sled to hold a 2S 300mAh battery for powering electronics in a 3.0in rocket. Image shows model built using PETG with no supports and 0.2mm layer height. Slots are used to mount battery to…
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
High powered rocketry requires use of rail buttons to retain the rockets to the guide rails. The rail buttons are either affixed using wood screws into the rocket body or with weld nuts that don't mount flushly against the inner rocket…
Multi - Diameter Launch Tower System. This is a Tower launcher Head I developed for a camera tripod I was given. It has a center open zone or tube suitable for piston usage. The “tripod head assembly” consists of usually three (3) of the…
Hello, this is BRRDS, (Best Rocketry Research Determination System), a high-power rocket developed at NCSSM over the past 3 years from 2019 and launched in late 2021. The purpose of the rocket was for research but really being able to go…
A collection of model rocket display stands. Includes 18 mm and 24 mm mounts. These were previously available separately, but I have decided to place them all together in a single location. This is labeled as a "Work in Progress" as I…
A handle or sleeve with switches to connect to an 18V Ryobi for launching model rockets Instructions Print the parts (one of each except 2X glue rings). Glue the sleeve to the clip plate and reinforce by gluing one ring at the bottom. Use…
Model made for use with Estes Model rocketry parts you need 2 centering rings
Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg = approximately 1 cc. The bottom takes a #4 or M3 screw to hold it to the bulk plate. The hole at 45 degrees is for the…
Inspired by Nerys (Today's 3D Print on youtube), I created some hollow cylinders with spiral reinforcement ribs. In the initial release I have included two outer diameter tube sizes corresponding to BT-50 and BT-55 rocket tube sizes. The…
I have been prowling the internet for TINY quick links for my rockets. the normal smallest is 3.5mm and its just too large and way to heavy for a typical 3" rocket. I did find some 2mm quick links but its a Japanese specialty item and…
Two OpenSCAD files for generating fin alignment jigs (one for three-finned rockets and one for four-finned rockets). Set the parameters at the start of the file and the rest should be pretty automatic. Please contact me with any questions…
The Altitude Indicator is a DIY tool to audibly report the peak altitude of model rockets. Check the full project on PCBway: https://www.pcbway.com/project/shareproject/Altitude_Indicator_with_Beeper_for_Rocketry_2c6ef724.html
Just a few parts of a high-powered rocket to get folks thinking about what's possible. Stl's of the Nose cone, body tube section (with male and female threads) and the fin can. You would need further customization to turn this into a…
PLA No supports Brim recommended TinkerCAD Ender 3, Ultimaker 2+ by akif a
