Rocketry 3.0in Electronics Bay for Eggfinder Mini TX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This sled is used to hold an Eggfinder Mini TX for use in a 3.0in high powered rocket electronics bay.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Model is a high powered rocket electronics bay sled to hold a Eggfinder MiniTX GPS Tracking unit in a 3.0in rocket.
Image shows model built using PETG with no supports and 0.2mm layer height.
#4 fasteners are required to attached MiniTX circuit board to sled.
The MiniTX sled can be paired with a 2S 300mAh battery sled to power the GPS tracker in a setup that nest into each other and mount in the same electronics bay.
The MiniTX sled can be paired with 2x 3.0in eBay End Caps to assemble an entire electronics bay. For the noted assembly, a piece of 6in 3.0in rocket coupler material is required as well as #10-24 all thread and 8x #10-24 nuts to mount the sled within the electronics bay.