1 / 2
Storage Shelf for Bolt/Screw and Small Part Containers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got tired of digging through the set of metric bolt and screw containers so decided to make a simple shelf.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
After digging through my set of different bolt and screw containers, I decided enough was enough and designed a quick and simply storage shelf for the boxes. Model is pretty thin and designed to use as little filament as possible while still remaining at least somewhat rigid.
Print on it's back for no supports.
You can also cut the first 1-2cm off the front to make it a little easier to access the containers and remove the need for the finger holes.