HeadsetstandFan with Noctua Airflow Amplifier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultimate combination of form and function. Headsetstandfan, version with Noctua airflow amplifier.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 1269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for your headphones, and a fan at the same time. Form and function in one package. My headsetstandfan fitted with Noctua Airflow Amplifier.
This uses a 120mm pc casefan. Cut the frame off, so that headsets fit better. Don't cut the wires though. There's a small channel for the wires inside the stand. Models have the wires coming out of the back instead of the front, like in prototypes pictures. I used a 12V power supply from a led strip and put a switch on the wire.
12V wired up straight to fans negative and positive, make it spin at full rated speed. Which is good because 120mm fans are kinda small, you want all the cooling power you can get.
Model options are small and tall. Tall has options for single piece, for printers with printbeds sized over 200mm. Tall option in two pieces is just cut to fit 200mm printbeds.
My original model design without Noctua Airflow Amplifier: https://www.printables.com/model/1112630-ultimate-headsetstandfan
Dont be a sweaty gamer, get a fan.