Lathe 12x2 index wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An index wheel for open-segment bowl making. Two rows of 12 holes allow for offsetting from the previous row.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
An index wheel for open-segment bowl making. Two rows of 12 holes allow for offsetting from the previous row.
You will need three segments & three aligners to complete the wheel. Glue them to a ø200 circle cut from 7mm ply. Gorilla glue worked for me. My lathe uses a 30mm centre hole in the ply (30mm x 3.5TPI).
Three prints are required. Use the aligner segments to complete the circle, and they can be discarded once the glue-up is done.
Edit: I added a zip file with a standalone_segmented_bowl_designer in html format. (I got sick of the ads in blocklayer.com)