Lathe 12x2 index wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An index wheel for open-segment bowl making. Two rows of 12 holes allow for offsetting from the previous row.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 27
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
An index wheel for open-segment bowl making. Two rows of 12 holes allow for offsetting from the previous row.
You will need three segments & three aligners to complete the wheel. Glue them to a ø200 circle cut from 7mm ply. Gorilla glue worked for me. My lathe uses a 30mm centre hole in the ply (30mm x 3.5TPI).
Three prints are required. Use the aligner segments to complete the circle, and they can be discarded once the glue-up is done.
Edit: I added a zip file with a standalone_segmented_bowl_designer in html format. (I got sick of the ads in blocklayer.com)