1 / 2
Walther GSP 500 Picatinny rail on magwell — zdjęcie 1
1 / 2

Walther GSP 500 Picatinny rail on magwell

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An attachment for your magwell that allows you to mount a Mantis-X sensor, for example on your Walther GSP 500.

Ocena
0 / 5
Polubienia
2
Pobrania
54
Wydruki
0
Wyświetlenia
715
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Additional Hardware you need for this Print:

  1. 2x M5 threaded Inserts (short ones. The max. length shut be 8mm)
  2. 2x M5 set screws (optional with a Polymer tip)

I recommend the print orientation as seen on the Pictures. In this vertikal stand no support shut be needed. Depending on your bed adhesion, you might need to print with a brim. 

Good luck with your project – and "Gut Schuss!"

Tagi