Unistrut trolley for use with wood screw hooks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unistrut trolley remixed to work with hooks that have a 5/16-9 wood screw thread.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 94
- Wydruki
- 1
- Wyświetlenia
- 676
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Unistrut trolley for creating sliding storage, such as for bike wheels. Based on the original by BJKeane3 (also check out his other great models!) and remixed to work with hooks that have a wood screw thread instead of a machine screw thread. The hooks that I have use a 5/16" 9 tpi coarse wood thread, so this is modeled into the hole, so it should screw in easily and be quite strong.
Uses standard 608 bearings - 22x8x7.
You might notice I don't have photos of these installed in Unistrut. That's because I printed the model before getting the Unistrut. Got a printer at home, but need to drive to the Home Depot to get that.
Printing
I used 0.2mm layer heights with a 0.4mm nozzle, 3 shells and 20% infill. Printed in Printed Solid Jessie PETG. Supports from print bed enabled for the bearing supports.