Liczymy pasujące modele…
This is the overhead locker from Borderlands 4! Use it to store all of your epic loot. The model features a spring assisted opening mechanism and holders for a hammer, craft knife, and tape measure. For assembly instructions, please watch…
Subaru Overhead Ham Radio Mount (Icom 2730A) Vehicles It Fits: Outback 2015-2017 Possibly 2018 and 2019 as well. Forester: 2014-2016 WARNING: I am not responsible for any damage to your vehicle. This project will permanently alter your…
Mounts onto any of the threaded holes in the upper frame using M3 hardware. Follow the C920 disassembly guide here . You will also need to print this mount , originally for Voron. Not posting it as a file here to avoid any confusion as to…
A simple mount for overhead storage on the bottom side of a shelf for example for Brother DK rolls. The mount is designed for two 3mm countersunk screws.
2x m3 nuts and bolts to match the AP mounting plate to the beam holder and one m5 bolt to squeeze the tensioner.
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
Simple adapter to mount a Manfrotto tripod pole on a cabinet. See its function here: https://youtube.com/shorts/R8_4c3V0_90?feature=share The locking mechanism uses a TPU insert that acts as a brake pad to grip the tube without scratching…
Print List: 2 Arms, 2 Pins, 2 bearings and 1 Roller. Bearings are 608 bearings, printed with .177 cal BBs. To print these, you have to pause the print to install the BBs, I found layer 24 works best with a .2mm layer height, but you may…
2x m3 nuts and bolts to match the AP mounting plate to the beam holder and one m5 bolt to squeeze the tensioner.
This spool holder is designed to optimize TPU and abrasive filament printing by having the TPU filament feed directly into the print head. It utilizes the OEM Elegoo filament spool holder or this upgraded ball-bearing mount:…
I have some long pipe clamps that I wanted to store on the low part of the ceiling in my garage. I designed these brackets. You will need to print them in pairs. I know they will fit on a Bambu 256x256 print bed. Unfortunately this model…
Hi there, We purchased a mobile for our baby and found there was no way to effectively mount it on the bassinet. So I took it upon myself to design a new mount for the bassinet. It works brilliantly and is easy to install. The pole 3mf…
I wanted a spool holder to hold a filament spool above a Bambu Lab A1 Mini. By having the spool above it would mean more desk space. It made me nervous having a kilogram spool directly above the printer so I made it very strong and…
This adapter allows connection of a 2.5" dust collection hose to the top of a Shopsmith Mark V 510, 520, or Mark 7 upper saw guard for overhead dust collection. Based on the concepts and ideas of William H Seward IV. Many thanks to…
ENGLISH foot for Kobra 3 ACE overhead mount : https://www.makeronline.com/en/model/KOBRA-3%20ACE%20OVERHEAD%20MOUNT%20V2/31836.htm l FRANÇAIS pied de renfort pour le support de l'ACE au dessus de la Kobra 3 de ce modèle :…
ENGLISH build plate holder for Kobra 3 fixed on the ACE overhead mount : https://www.makeronline.com/en/model/KOBRA-3%20ACE%20OVERHEAD%20MOUNT%20V2/31836.htm l FRANÇAIS support pour 5 plateaux pour Kobra 3 fixé sur le support de l'ACE au…
ENGLISH tray for Kobra 3 fixed on the ACE overhead mount : https://www.makeronline.com/en/model/KOBRA-3%20ACE%20OVERHEAD%20MOUNT%20V2/31836.htm l FRANÇAIS bac pour Kobra 3 fixé sur le support de l'ACE au dessus de la Kobra 3 de ce modèle…
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
These are the DFX and STL files from the DIY Airbus Light Panel. I used a laser to cut the Panels and a 2.5 mm plate. I also uploaded the LightBurn project to edit and customize it on Thingiverse (https://www.thingiverse.com/thing:6789303).
I moved the filament spool on my Ender 3 Max printer when I upgraded to the Sprite Pro direct drive extruder. I found when the extruder is moving on the x-axis, the filament is free to move uncontrollably. So I added this guide to help…
Camera mount for my hanger. 30% infill 0.2mm Layer Height you'll need 4 sets of M3 bolts and nuts finally ¼ bolt to hold your camera ciao
I used these switches: https://www.amazon.com/dp/B0CW8QF5NK?ref=ppx_yo2ov_dt_b_fed_asin_title
I have a wine glass rack builtin over my sink and wanted a way to hang various brushes/kitchen elements
Disassemble the blade guard and install this print using the stock hardware. I used a zip tie to secure it to the end where there is no hardware. Other solutions seemed like a lot of complexity where this “just works”. Fits 2.5" vacuum…
My personal design for an overhead filament roller holder inside of Lack sized enclosure, or under a shelf that is over your print area. Utilizes the commonly found 90mm filament rollers designed to work with 608 bearings, so feel free to…
Spool holder designed to be fixed above the printer, i.e. on the underside of a shelf
A Click on Overhead Bowden runway for the AC Kobra 3 Combo that keeps the bowden away from the belt for the z axis and helps it stay on top while the Printerhead is moving. 25% infill Gyroid 0.4 mm Nozzle 0.2 mm Layer Height
I designed a simple holder for the Bosch Advanceddrill 18. You have to push the cordless screwdriver all the way in. The rocker switches for right and left rotation hold it in the holder. Not very pretty, but it works.
Check other uploads on my profile for the rest of the parts for this project! (such as aluminium profiles frame or knobs) Parts you will need: -3x M5 x 35mm screws -2x M6 x 25-30mm screw (for the lock-in slider mode) -2x M6 nut (for the…
Just insert the camera into the square slot, it fits a little tight but just enough to get a good snug fit, then unscrew the 2 bolts marked in the image and slide the mount in, it should fit across the whole way with a couple millimeters…
Ford Expedition Overhead Console Hinge This is a replacement hinge for the sunglasses holder or conversation mirror in the overhead console of a 2007–2014 Ford Expedition . Print Settings: Supports: Tree Infill: Any (100% preferred)…
Made these to use an old drawing tablet as a mini display. Good for small apps like Spotify or discord. printed in PETG with 5 perimeters, tho 4 should be fine. i recommend adding some no slip pads on the clip contact surface, though i…
This model is two parts, a base that contains most of the charging circuit, where the buttons and LEDs are attached, and a frame that retains the transceivers and snaps into the vehicle interior. The 2011 Silverado overhead console is GM…
An easy to print hook that fits on the Rivian grab handles above the doors and allows you to hang clothes hangers from them. There are two versions with different length backs, I found both fit easily and neither came loose. There are…
Ace Top Mount Kobra 3 MAX Since receiving My first Kobra 3 I wanted to mount the ACE above the unit. I originally had it on a shelf, but it was difficult to work with so high. I saw other top mounts, but they needed to much filament, were…
Drilling the wall and want to keep it clean, Sure! but what about the ceiling? the worst thing is a face full of dust from drilling. No more! This attachment allows the hose to go near horizontal or vertical and has enough holding power…
Just modified Rev.3 a bit more as I was making an extra wide version for use with my extra wide OHSH. Added gusset, changed the dimensions a tad for better fitment. Keep your OHSH from falling or being pulled from it's perch! Enjoy! note:…
Remixed from http://www.thingiverse.com/thing:12974 as the Dup4 is close to the Replicator 1 but it varies enough to require a slight rework. Revision 2 allows for easier attachment and better fitment with the added relief. Removed older…
A very simple overhead mount for a various things - in this specific case for my old phone that now serves as a photo-station for book covers and other materials. In addition of printed pieces you will also need a 32x32mm wooden plank…
🎁 Get $100(s) in Rivian Rewards points and 3 months free RAN charging by using my referral code TODD11893313 when 🛒 ordering a Rivian . UPDATES 2025-10-24 Added the -v2 version as an alternate style with rounded edges. The arms of my…
Designed to support 1.25" EMT conduit, and over engineered to prevent any twisting of the carriage as I'm using this system with a Lowrider 3 CNC by V1Engineering. Notes: The model works with M8 Bolts and 608 2RS Bearings I got the…
Threw this together pretty quickly. Me and my partner spend a lot of time in this section of our small kitchen, between dishes and food prep. I've been using our overhead dish drain to prop up my phone to watch youtube videos while I do…
This is a simple and sturdy overhead spool holder, designed as a single piece for easy 3D printing. It can be mounted on the ceiling or the top of an enclosure to save space and provide a smooth, direct filament path to your printer's…
I purchased a replacement for the overhead light on my boxster and the side clips which hold it in place were broken. It seems to be a common problem so this piece can be glued in its place and fulfills the same function.
These feet will securely hold 15mm rails that are commonly used for camera rigs. I designed this because I wanted a simple overhead camera mount for making YouTube tutorial videos. I wanted something that wouldn't take up a lot of space…
I was looking for a way to take better videos of some of my work when I determined I needed a way to shoot overhead. After a little bit of searching, I never found anything that piqued my interest and I was willing to pay for, so, as all…
This is my solution for wanting an overhead LED light that works with Multiboard. The files work as uploaded but this is still currently a work in progress. Functionally they are fine, aesthetically, and proper design/printing standards…
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
I made a "cone of shame" for my drill, the kind that you would use to keep your dog from licking his surgical stitches. Except that this is just to catch the dust from overhead drilling. There are several excellent dust catchers on…
I have a cabinet over the top of my printer and couldn't get the top glass in the original due to clearance.
Needed additional overhead clearance to get the top in due to a cabinet overhead. Matches my other remix of the 270 hinge holder.
A custom, no support solution for your H0 scale tensioned catenary needs. Comes with three types of masts: Regular, Tensioner and End-Stop To make the overhead line sway left and right along the path there are IN and OUT versions of each.…
These 3D-printed feet adapt the original Kobra 3 Ultimate ACE Pro Overhead Mount riser , designed by Darren for use on the Anycubic Kobra S1 . I designed them so I wouldn’t have to discard an already-printed riser for the Kobra 3. With…
[WIP] Im building it but it should all fit. Will post results when im done printing and building it. A overhead camera jig. For overhead viewing angles, if you are for example: Opening trading cards Repairing stuff for videos or guides…
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
Quick and simple: I wanted to hang my PolyDryer boxes above my Prusa Mk4, so I put this together. Works great and has a great balance between rigidity and material efficiency. Requires only 126 g of PLA. Printed at an angle, so that we…
Overhead Mount for Echo Dot 4 This sleek and sturdy mount is specifically designed for the Echo Dot (4th Generation) . It allows for secure overhead mounting , making it perfect for installation under kitchen cabinets, shelves, or on the…
This is a replacement hinge repair kit for the overhead sunglasses holder found in Toyota Highlander models from 2020–2024 . The factory hinge is a common failure point and not sold separately by Toyota , often requiring replacement of…
Add an overhead camera to your Q2! This replaces the existing top glass handle and uses the same screws to mount. Disassemble the Nebula camera as you will only need the camera PCB and the USB cable and the two screws holding the PCB.…
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
Print-Friendly Design: ✅ Standard FDM printers – no MMU required 🧩 Panel is split into two parts to fit printers like Prusa MK3/MK4 or Bambu Lab 🪛 Parts are designed for easy alignment and assembly using printed alignment pins ✅ MMU -…
This is a small overhead lampshade designed to fully cover the lightbulb while still leaving a good amount of clearance below -- where mine is located, there is a door beneath without enough room for a larger cover. The lampshade consists…
I designed this filament guide to solve a practical issue in my own workspace where filament spools are stored on a shelf above the printer. The guide mounts to an IKEA Skadis pegboard and helps route the filament down back (via the…
OpenSourceEV Parts designs, produces, and shares 3D‑printed parts for Rivian and GM EVs. Staying true to our open‑source mission, every product we create comes with free STL files so anyone can remix, customize, or print at home for…
Simple adapter to mount a Manfrotto tripod pole on a cabinet. See its function here: https://youtube.com/shorts/R8_4c3V0_90?feature=share The locking mechanism uses a TPU insert that acts as a brake pad to grip the tube without scratching…
Print List: 2 Arms, 2 Pins, 2 bearings and 1 Roller. Bearings are 608 bearings, printed with .177 cal BBs. To print these, you have to pause the print to install the BBs, I found layer 24 works best with a .2mm layer height, but you may…
This is a sensor mount for Ikea's new Matter compatible Mygbett door/window sensor in combination with Hörmann overhead doors. It fits both my doors - even though they are different and 17 year apart in production. The existing two holes…
A sturdy, top-mounted filament spool holder designed for the Creality K1 / K1C / K1 Max. Moving the spool to the top saves desk space and provides a smoother filament path. Better fot TPU ⚠ IMPORTANT FITMENT NOTE: The mounting base of…
This switch panel is for a replacement of a us spec lc100 sunglass holder. I printed this with asa and fuzzy skin on the front panel.
Custom Overhead Light Base Panel - Kia cee'd (2006-2012) This is a universal mounting base for the front interior light console. It is designed for DIY enthusiasts who want to create their own custom LED lighting, switch panels, or…
It is recommended to print using PETG or ASA to withstand high temperatures inside the car.
Nothing too fancy, just a simple filament guide for direct drive extruders. In my case, I started feeding directly from a filament dryer positioned directly behind the printer. Just stick it where your spool used to be and you'll be good…
This spool holder is designed to optimize TPU and abrasive filament printing by having the TPU filament feed directly into the print head. It utilizes the OEM Elegoo filament spool holder or this upgraded ball-bearing mount:…
I wanted to add a light switch in my campervan. This moves the square switch to the side, and makes space for another switch. Printed using the filament below, which matches the color very well. (even better in real life than the photo…
This setup takes the weight and wobbles off your gantry. Makes for smooth rotation of multiple spools simultaneously. One inch conduit fit to length, 2x4's etcetera are up to you. Two 6205 bearings for each spool. Recommend 100% infill on…
Designed to mount glide gear overhead camera rig to the wall for easy access and storage. Think it's designed for OH 50 Camera/Smartphone Overhead Stand but not sure if that's the exact same model as the one I have since bought over 5…
I wanted to have an overhead camera so I designed this to replace the glass lid holder on the D3D riser with a camera mount. BOM: 3 x M3x4x5 heated inserts (optional) 3 x 19x19mm cable tie mounts 3.5mm diameter hole 3 x cable ties 3 x M3…
Creality K1 & K2 Series Top Spool Holder - Overhead TPU Mod This direct overhead spool holder modification is engineered for the Creality K1 series (K1, K1C, K1 Max, K1 SE) and the K2 series (K2) to optimize the filament feed path for…
Éclairage d’atelier DEL pour MultiBoard 85cm — Solution d’éclairage compacte et robuste qui se fixe directement sur les panneaux MultiBoard. Installation rapide, orientation pratique et conception durable pour un atelier mieux éclairé au…
I was unsatisfied with the print quality of other models on the market so I made my own based on those available. I have tweaked the dimensions for a better fit and slightly better visibility. Sized for a cobra mini 19 but the blueprints…
English version : Hello everyone This is a scale model of an overhead crane that I designed as a retirement gift for a colleague. I work in a factory that manufactures long round steel products, which is why I chose to include a bundle of…
I was missing a foot lift handle on my garage door, and they're very convenient. I made my own, and included an optional back plate, too. It has two 0.25" mounting holes in the rear for 7/16 bolts. Category: Replacement Parts
I looked over other models already posted, but I saw comments regarding looseness, so I used Fusion and designed a new version for myself, and I figured I would post it in case anyone else wants a copy. It is quite snug, tolerance is in…
I needed to replace the broken light shades on my overhead fixtures in my motorhome but since I replaced the incandescent bulbs with LED bulbs there was a glare problem. The best fix was for me to print copies of the original which were…
This is a sleeve that holds an IPevo HD Plus camera on any VESA-compliant monitor/TV mount. I use it to hold the overhead camera above my desk, get additional height, and most importantly keep it out of the way when I'm not using it. This…
Similar to some other FT-5 spool mounts, but with a couple of differences: I designed a horizontal lip to hold the weight, rather than relying on the bolts & T-nuts to support all of the weight. Chose to design this one to work with a 1"…
Surrounds an Anker SoundCore speaker in the storage "slot" above the dashboard of a Volkswagen Transporter T5. It doesn't quite match the corner rounding or "depth" of the speaker, but it still fits really well to cover up the gaps around…
The overhead console in my 1999 Dodge Ram fell off of the headliner due to the forward clips being broken. These clips were designed to replace the forward plastic clips for the overhead console to hold it in place. To use these clips,…
This is a overhead hanger for the Valve Index HMD that utilizes the top head strap with 3 holes for mounting. Great for mounting to the roof of a room for out the way storage of the headset or attaching to other surfaces. Depending on the…
Recommended to print with PETG or PC. Requires (2) M3x10 screws and (2) M3 brass knurled insert nuts. Using with this camera boom arm: https://amzn.to/3Ln1d0t
Update: Jan. 10th, 2022- Corrected length of filament block bearing shaft screws. Was 12mm, they are actually M2.5x10mm. Revised bearing block model and added a 20mm length of PTFE tubing to the build. Without the tubing to guide the…
When I saw the moon model I knew it was a must have For my soon to be born newborn's nursery. I designed this ring eliminate upward light leakage and to seat the Hue Bulb perfectly In the ideal position when hanging overhead from a…
Designed and tested by volunteers from SOMD Loves You. A local non-profit organization formed in Southern Maryland, USA. For most up to date version of this design, as well as a full technical data package for other related files and…
Overhead crane for a 1:87 H0 model train scene. More information at: https://enelys3d.netlify.app/The_Overhead_Crane/ My first version of this overhead crane was slightly more detailed with U beams and smaller supporting X beams. I made…
Microphone mount for 5th Gen 4Runner: -Replaces OEM microphone in overhead console -Designed to fit Kenwood aftermarket microphone such as p/n ZYW3967-339 The mk8 file is the latest version, and the microphone passes through the bottom…
Dust collection adapter for connecting the Bosch 1617 plunge base to Festool 27mm hose. Requires: (2) M3x10mm screws (2) M3 hex nuts (2) M4x25mm screws 3 perimeters, no supports.
These hangars are mounted using #4 or M3 wood screws. any spare screws laying around should work thought. The mounts should snap into the spacing tool, which you can then line up along a straight edge for easy mounting. I used a few…
Replace the stock blank cover on the overhead console to now add (4) 12mm switches. If you have the interior sensors (found on higher trimmed trucks), you will need to remix my design to add those holes. I have a XLT which does not have…
![Overhead Phone Camera Jig [WIP]](https://media.printables.com/media/prints/65bbf4cb-8033-4a12-9a5b-59e550dbf6ea/images/10731535_524f89cd-eb8a-40ad-aa9e-73ffaf6269b4_d663bab9-447b-4c1f-8d16-07b71e759c69/blue-1-resin.png)
