1 / 6
Kobra S1 – Adapter Feet for Kobra 3 Overhead Mount Riser — zdjęcie 1
1 / 6

Kobra S1 – Adapter Feet for Kobra 3 Overhead Mount Riser

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter feet that allow the Kobra 3 overhead riser to be reused on the Anycubic Kobra S1.

Ocena
0 / 5
Polubienia
36
Pobrania
171
Wydruki
0
Wyświetlenia
2054
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These 3D-printed feet adapt the original Kobra 3 Ultimate ACE Pro Overhead Mount riser, designed by Darren for use on the Anycubic Kobra S1. I designed them so I wouldn’t have to discard an already-printed riser for the Kobra 3. With these feet, you can reuse the original riser and make it fully compatible with the Kobra S1. The lid can be fully operated.

For mounting I used 4 screws that fixed the print bed and some screws that I have laying around 3x20 mm.

Printed in PLA, wallcount 5, infill 10%, Gyroid.

Tagi