Jetboil Collapsible Cup Storage Addition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sea to Summit frontier collapsible cup threaded storage container. For use with the Jetboil flash 2.0 (or without..)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Description:
This model is designed to sit on the top (or bottom) of a Jetboil flash 2.0.
The storage cup holds 4x Sea to Summit collapsible cups (https://seatosummit.com/en-ca/products/frontier-collapsible-cup).
Holes on the bottom are just for drying when not in use. I usually just throw in a paper towel when on the trail to absorb anything after use.
Print Details:
Printed in PETG, but would likely work in PLA or ASA just fine.
0.4mm nozzle, 0.2mm layer height
Printed with -0.1XY compensation to give the threads a bit of room. Worked well.
Print with support under the handle and the strap relief on the lid. Came off nicely and actually added a bit of a friction surface for the strap to grip on.
Printed with fuzzy skin on the lid for grip getting it on and off (0.2mm depth and 0.3mm distance).
Post processing - only thing I do is round off the top thread on the cup, makes it easier to get the lid to start threading (thread alignment). Takes a few thread on and off's to get the threads to be smooth. some light sanding would help speed that up.