Jetboil Collapsible Cup Storage Addition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sea to Summit frontier collapsible cup threaded storage container. For use with the Jetboil flash 2.0 (or without..)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 296
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Description:
This model is designed to sit on the top (or bottom) of a Jetboil flash 2.0.
The storage cup holds 4x Sea to Summit collapsible cups (https://seatosummit.com/en-ca/products/frontier-collapsible-cup).
Holes on the bottom are just for drying when not in use. I usually just throw in a paper towel when on the trail to absorb anything after use.
Print Details:
Printed in PETG, but would likely work in PLA or ASA just fine.
0.4mm nozzle, 0.2mm layer height
Printed with -0.1XY compensation to give the threads a bit of room. Worked well.
Print with support under the handle and the strap relief on the lid. Came off nicely and actually added a bit of a friction surface for the strap to grip on.
Printed with fuzzy skin on the lid for grip getting it on and off (0.2mm depth and 0.3mm distance).
Post processing - only thing I do is round off the top thread on the cup, makes it easier to get the lid to start threading (thread alignment). Takes a few thread on and off's to get the threads to be smooth. some light sanding would help speed that up.