PTFE Passthrough for Original Prusa Enclosure + MMU3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PTFE tube passthrough designed for Original Prusa Enclosure and MMU.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 483
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently built an MMU3 and chose to go with the (Un)original Prusa Drybox with the MMU3 5 Spool Auto-rewinder instead of the whole buffer system (which I highly recommend). However, I didn't like any of the existing possibilities for passing through the PTFE tubes from the drybox into the enclosure, so I made this. It does require a hole to be drilled/cut in the plexiglass, but I like the smooth path the PTFE tubes take much better than the alternatives.
I used the “back” piece as a template for drilling/cutting the holes and that worked out well.
Parts Needed
- 4 x M3 nuts
- 4 x M3x6 (I think) socket head cap screws
Print Settings
- Since it is part of the enclosure, I used PETG.
- 0.2mm layer height
- 20% infill
Other Information
I designed a plug that will fit inside this passthrough that is meant to be printed in TPU. It's not necessary; I used this for weeks without the TPU plug, but once I added the enclosure fan, I wanted to close up the hole to keep dust out.
When printing the TPU plug, I used:
- 0% lightning infill
- 0.2mm layer height