1 / 3
PTFE Passthrough for Original Prusa Enclosure + MMU3 — image 1
1 / 3

PTFE Passthrough for Original Prusa Enclosure + MMU3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PTFE tube passthrough designed for Original Prusa Enclosure and MMU.

Rating
5 / 5
Likes
20
Downloads
61
Makes
1
Views
483
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I recently built an MMU3 and chose to go with the (Un)original Prusa Drybox with the MMU3 5 Spool Auto-rewinder instead of the whole buffer system (which I highly recommend). However, I didn't like any of the existing possibilities for passing through the PTFE tubes from the drybox into the enclosure, so I made this. It does require a hole to be drilled/cut in the plexiglass, but I like the smooth path the PTFE tubes take much better than the alternatives. 

I used the “back” piece as a template for drilling/cutting the holes and that worked out well. 

Parts Needed

  • 4 x M3 nuts
  • 4 x M3x6 (I think) socket head cap screws

Print Settings

  • Since it is part of the enclosure, I used PETG. 
  • 0.2mm layer height
  • 20% infill

Other Information

I designed a plug that will fit inside this passthrough that is meant to be printed in TPU. It's not necessary; I used this for weeks without the TPU plug, but once I added the enclosure fan, I wanted to close up the hole to keep dust out. 

When printing the TPU plug, I used:

  • 0% lightning infill
  • 0.2mm layer height

 

Tags