Leveling foot for GE stove
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for GE® 30" Free-Standing Electric Range JBS55DM2WW, replacement for WB02X10521
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 2
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Use
for GE® 30" Free-Standing Electric Range JBS55DM2WW, replacement for WB02X10521
see item
296
Disclaimer
design taken from brand new replacement before being put into service
dimensions are on a best effort basis & design untested
thread is a mangled SP400-L-5 bottle thread that looks functionally close enough
OEM thread appears to be some kind of square thread
reverse engineered by measuring pitch, major OD, minor OD
if I do have to replace this, I will probably print this out & test it
optimized for SLA, I recommend Tough 2k from Formlabs, or similar
Compatible tools
foot hex is 35 mm across flats
male hex on top of foot is 11 mm across flats
Rev 3 changes
fine tuning thread fit – previous versions could not fit, seemingly because the minor OD way too big
45 mm total height
for some reason, the feet on my stove are taller than the OEM PN replacement
include 12 mm deep 8 mm hex drive at bottom for ease of assembly
dimensions per ASME B18.3.1M
