Liczymy pasujące modele…
Solution to fit my 49.6mm tamper disc into my 51mm self leveling tamper. Links to the products: Coffee Tamper 41mm 49mm 51mm 53mm 57.5mm 58.35mm Wooden Handle Stainless Steel Delonghi Breville Barista Espresso Accessories - AliExpress…
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
This file is a 20x20cm first layer to perfectly level your bed. You're wasting slightly more material than printing single leveling dots in the corners of your bed but you're able to see your complete first layer, which helped me with…
Leveling stand for the Flightscope Mevo+ launch monitor. Makes leveling easier especially on the driving range grass. Multiple slots for adjusting angle (good for outdoor vs. indoor). Also a slot for a small bubble level, but I found it's…
https://www.thingiverse.com/thing:2496831 is really handy for leveling, but I found it still a bit hard to turn so I made the knob wider with a pattern to make it easier to grip and turn. Post-Printing I used a #1 phillips head…
NOTE 2/01/26: Tool works great on the Centauri Carbon 2. Just received my CC2 and the back right corner was lower than all the other 4 corners. UPDATED MODEL : Since this tool seems to be helping people get the bed aligned I made some…
Tool to pre-level the powder in a LisaX ( or similar model) from Sinterit before the leveling procedure.
This is a measuring tool for easily determining the Z-axis offset. I wanted to level the print bed of my Core ONE and print the following model: However, it is not easy to measure the distance with a caliper, so I printed this model to…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Used in various Mercedes-Benz car models from 2007 up to 2016 in E-Class C207, A207 and C-Class W204, S204. If you need…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or debris. When assembling, apply a generous amount of thick grease to the joints to ensure smooth movement and…
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…
I needed a filament holder/roller to use in a couple of projects I had going. I wanted a model that I could easily reuse without having to re-integrate each time I made a change to it. As you will note I've taken inspiration from other…
Print notes: Print vertically (threads upright) Enable light supports between threads only Brim recommended 5 walls / perimeters 20–40% infill PETG or ABS recommended
Bed leveling prints for all creality 3D printer models (still working on this so more models will be added) great way to check if your hot bed is level and ready for printing. can also show where the bed is too high or is too low to help…
Dock to park the PCB Klicky probe on the Raise3D Pro 2. Can be used with the orbiter V3 mount:
Hi, I noticed some parts of my bed that was not adhering correctly. I made this file to test and indeed the top right side was not correct. After a total reset of the printer and a good bed cleaning everything went back to normal. If you…
Adjustable leveling feet for a laser worktable Hardware BOM 1× M3 × 30 cylinder head screw or pan head screw 1× 693ZZ bearing 2× M3 nuts 3× M3 countersunk screws with nuts or 3 mm wood screws (depending on the material the feet are…
Print in the orientation in which it shows up in your slicer. This will make it so no supports are needed and will also be the strongest print due to the layer lines being perpendicular to the weight of the object you are placing on it.…
This is a tool that helps in leveling of suspended ceilings with CD60 profiles and direct hangers "ES". Should fit hangers of most brands. Slot was specifically enlarged to fit Norgips brand ES hangers. Includes custom *.3mf PrusaSlicer…
I would print this model from PETG to prevent "Plastic Creep" and warping over time. This is a leveling base for anniversary clocks, also known as 400 day clocks. Some of these clocks did not have leveling features at all, or sometimes…
I wanted some leveling feet for an end table I was building so I designed these inserts around a 1.25” 1/4” hex bolt and nut. You can use longer or shorter bolts if you want. A bolt shorter than 1" might not work well. To install the foot…
4x M4 x 20 set screw 4x M4 nylon lock nut or 4x M4 Threaded Inserts M4x8,1x6,3
A great tool for anyone looking to achieve precise, professional-level coffee preparation! This practical coffee distributor is designed to evenly distribute coffee grounds before tamping. It's perfect for those looking to achieve…
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
Parametric wedges for leveling or tensioning. I printed them with TPU for toughness and grip. 1 pair per file Parametric Fusion360 File. You can change: baseHight, stepHight, lenght, thickness .stl and .3mf Files in multiple sizes named:…
Heavy Duty M8 Furniture Leveling Foot (Ø40mm x 10mm) Description: A low-profile, heavy-duty leveling foot designed for standard M8 hex bolts . With a 40mm diameter , it provides excellent stability and weight distribution, making it…
Compact M6 Leveling Foot (Ø20mm x 8mm) Description: A compact, low-profile leveling foot designed for M6 hex bolts . With a 20mm diameter and 8mm height , it’s perfect for smaller furniture, equipment stands, or DIY projects where space…
Simple remix I did to alleviate an issue I was having with the roller assy not fitting through 55mm bore spools.
Elevate your coffee game with this Adjustable Coffee Leveling Distributor . Easily set the depth for perfect, even grounds before tamping, ensuring consistent, rich espresso shots. Adjustable Depth: Customize from 5-10mm. Even Grounds…
I salvaged some adjustable leveling feet which didn't have rubber pads on them, so I modeled them. The adjustable feet I have are not labeled/stamped in any way. Mine happen to be 2 3/8" diameter and 2.6mm thick. I figured it is unlikely…
I saw a friend using a tool for his Elegoo printer to level the print bed. I decided to make something similar to it for my K1Max. This is a simple tool that helps in leveling the K1 series print bed. It hangs from the upper X carriage…
I recommend printing from PETG. Adjust the size in the slicer. Glue with a thin layer of medium CA.
Nastavitelná noha pro stůl. Nohu lze prodloužit o 1 až 10 cm. Použitý materiál PETG. U výsuvné nohy je použita výplň 3D plástev. Adjustable PETG table foot (1-10cm). 3D honeycomb infill for extra strength. Fixes wobbling on uneven floors.
This is a light and mirror for an F-35 leveling fixture. The bubble level on the fixture is difficult to view from above or with a mirror and flashlight so this device sits on top of the bubble level. You can build one yourself with the…
Jinwoo's Kasaka Venom Fang Dagger (Solo Leveling) Dimensions (mm) : 138 x 142 x 26 I used around 20 grams of filament, supports must be enabled
A perimeter with bisecting diagonal crosses to test the level of the bed around the perimeter and across the middle. Use .4mm nozzle and .2mm layer height.
A perimeter with bisecting diagonal crosses to test the level of the bed around the perimeter and across the middle.
This set of leveling feet Screw Caps is designed to cover any standard M10 hex bolt as scratch protection and anti-slipping. One file is the bolt cover, the other file is accompanying as a simple screw-on foot in similar dimensions. Use a…
Screw levels for Gracima paella burner. Allows for achieving a level cooking surface on non-flat ground. Settings for STL are shown in the attached photo, can be adjusted in the SCAD file.
Simple Knurl Knob bolt for leveling the stand.
Ersatz für die Standard-Einstellraeder des Mega Pro. Die Skala erlaubt das einfache Einstellen bei der Verwendung unterschiedlich dicker Druckplatten auf einem magnetischen Heizbett (Steigung vom M3-Gewinde ist 0.5, d.h. eine volle…
Problem: Especially after printing at higher speeds, I slowly noticed that the leveling was getting worse and worse. Of course, this could be quickly fixed with ABL, but it still felt not right. Solution: I search for possibilities, also…
Gluing some sheet metal to this extremely simple model will allow an inductive bed leveling sensor to be spoofed, making the printer think it is lower than it actually is. This is useful to more easily allow a height sensing tool such as…
A quick bed levelling test print for the Ender 3 V3 SE that prints over the locations that the probe measures to level the bed. Follow these steps for the best results: Level your bed using the auto leveling feature. Print this test.…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
The existing springs on my ELEGOO Neptune 4 Pro printer have been quite crooked / bent. For better stability I always tried to keep them as low to the bed as possible, but the maximum compression led to a quite uneven bed. For other…
Designed for use with threded inserts and the extra lenght to work with different designs of bedsupports
If you encounter significant variations in bed level, especially in one of the corners, consider printing these shims and placing them under the bed supports. By doing so, your bed level will greatly improve and become easier to adjust.…
In case you can or do not want to remove the skirting boards when mounting an IKEA system to the wall. Here is a spacer to compansate for that distance to the wall. Resize to your needs by altering the z height in your slicer or in the…
Sadly if you want other colors you need to paint it manually. The option that I used are: 0,08 Extra fine but 0,20 is ok Important In the section Strenght→Walls : activate the “Detect thin wall”.
The build are pretty straight forward, the design is optimized for my printer tolerance. If this become somewhat popular, I will make a better tutorial and documentation. Stay updated & get in contact instagram.com/papolele Parts: 1 pcs,…
Template Jig for HanKun Adjustable Furniture Leveling Feet Furniture Leveler Tee Nut Kit 3/8-16 Inch Thread Size
Remixed mount to fit my Harbor Freight dial indicator with a 9.5mm shaft.
Bushing that free up slop in this self leveling tamper: https://www.aliexpress.us/item/3256806897868416.html?spm=a2g0s.12269583.0.0.40876595OcScEC&gatewayAdapt=glo2usa
Mounts with 2 M4 bolts. I had a leveling tube laying around from an Ikea shelf kit, but can purchase here:…
Solution to fit my 49.6mm tamper disc into my 51mm self leveling tamper. Links to the products: Coffee Tamper 41mm 49mm 51mm 53mm 57.5mm 58.35mm Wooden Handle Stainless Steel Delonghi Breville Barista Espresso Accessories - AliExpress…
This is an improved version of the original heliochronometer sundial base design. It allows one to mount the sundial to a head leveling base or tripod ball to greatly simplify leveling. It also has integrated bubble levels and a magnetic…
screw it to the bed with the M4,2 screws. height adjustment: M4x25 allen screw with square nut. lateral adjustment M4x12 allen screw. fixing with M2.5 spacer or M3 screw. there are versions with 11, 13, 15, 17 and 19mm thickness. i used…
Qidi Tech X-Plus 3 bed leveling This is just a 280mmx280mm square 0.2mm high. You do not have to print the whole thing, this model is just useful for adjusting that Z offset. Printed in Black Polymaker ASA 0.2 layer height
I wanted a nice looking portafilter stand / tamper station which supports my portafilter and levels it horizontal. I am using it now for two years and it works perfectly. I printed in PLA but other materials should also be fine. During…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Leveling rooks designed specifically for the Kobra 3. These are complete remodels inspired by @FreshPrints "THE ROOK" on printables. https://www.printables.com/model/653220-the-rook-anycubic-kobra-2-kobra-2-pro-kobra-2-plus I have…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Simple Leg Bartop 25mm with leveling we can use it with other application but for me i use it for my bartop Happy Printing Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament:…
Used to level all kinds of items, such as pictures, shelves, It has holes for marking the points where you will drill.It is a modular leveling tool where additional modules can be added The holes are 1cm apart from center to center. link…
Leveling shims for your Blackstone. The original version provides a single size, which gives you a ¼" rise with a wheel. Each one you stack, though, gives you ½" increase. I needed ½" total height increase, so I wanted to remix this.…
One scale division corresponds to a key rotation of 5.14 degrees and a height change of 0.01 mm (for M4 screws in increments of 0.7). You will need an enlarged washer M12 (DIN9021), an open-end wrench 7 and a hexagon from the printer kit.…
Compliant mechanism for precise manual bed leveling. This is my Print in place mechanism - no supports, no assembly, simple brim removal. Print Requirements 0.1 mm layer height or finer (First layer up to 0.2 mm) 0.4 mm Nozzle or finer Do…
This Angle Finder (Angle Meter, or Protractor if you prefer) helps you finding the exact angle to rotate the bed screws on your Nylock Mod , when leveling the print bed using Prusa Leveling Guide . Besides the original version with 10°…
Its a bed leveling test that uses a logarithmic spiral and concentric geometric shapes to establish a level printing surface.
A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…
Made this leveling plate to use phone to level camper using the free Level my RV app. Back of phone has the raised camera so I used this to bridge the camera rim. Worked great!
Here you have the calibration test for the Ender 3 Bed - 220 x 220 If you want more mods or information about your Ender 3, check it out on my personal website https://fixolab.dev/en/blog/creality-ender-3 Model available at Maker World…
Just a nice print if you dont wanna spend 21$ on the metal one. This is the same size and verified working on my m7 it has a indent for a 4mm magnet to hold it on mainshaft. I printed mine @ 0.16, nothing to post process.
Print with 15% grid infill Little bit of supports needed Prusament Orange PETG used
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 16mmx16mmx0.16mm squares in a 4x4 grid with 1.6x160x0.16 lines connecting each grid element to provide…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 16pt mesh is constructed of 16 20mmx20mmx0.2mm squares in a 4x4 grid with 2x200x0.2 lines connecting each grid element to provide whole…
This is a bed leveling test mesh to test bed leveling and z-offset to ensure proper bed adhesion. The 36pt mesh is constructed of 36 16.5mmx16.5mmx0.2mm squares in a 6x6 grid with 1.65x280x0.2 lines connecting each grid element to provide…
A large square with little thickness designed to assist in leveling your 3d printer bed.
When I work on my computer from the back seat, I use a tray to hold my laptop. The leveling feet allow the tray to rest on one side on the folded seat and on the other side on the door armrest. The angles of the leveling feet are…
This block is the perfect height to level the platform inside the IONIQ 5. The goal was to create a large, uniform, and level surface inside the car to set up an inflatable mattress for sleeping. PLA works just fine.
15% infill or more 0.20mm or lower for more detail Supports on for head
Original Qidi leveling blocks sent to me. Attached images showing how the blocks are spaced, however for the Qidi 4 Plus, use of two (2) spool adapters works better for leveling the bed. Print in any, any infill Please leave me a “Like”,…
This is a variation of the lower portion of this design: https://www.printables.com/model/294178-height-adjustable-extension-feet-for-lack-tables/remixes On my concrete floor, I found that the original foot would tend to make contact only…
Currently printing with 0.2mm layer height with 0.4mm nozzle. Printing with Bambu PETG-HF at 240 degreees. Some stringing up but the model is a work in progress.
Aesthetic remix of the “Flsun Q5 leveling sensor holder” of EA3D to be more discrete.
ENDER 3 V3 KE BED LEVELING SHIMS INCLUDED SPREADSHEET TO CALCULATE SHIMS OR SPACERS
I tried 120 clicks, but was too small and overkill, and the click tactile feedback wasn't strong enough to my taste. So picked 60 to match Klipper minute:second approach when using SCREWS_TILT_CALCULATE. These, fresh at least, have a nice…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
