Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used in various Mercedes-Benz car models from 2009 up to 2017 in CLS-Class and E-Class (C218, W212)
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Commercial Use - No Derivative
I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information.
Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or debris. When assembling, apply a generous amount of thick grease to the joints to ensure smooth movement and long-lasting operation.
These headlight leveling sensor rods were printed on a resin 3D printer using Anycubic Tough Resin 2, and the parts can also be printed successfully with PC (polycarbonate) filament.
The download package includes a few different size variations to compensate for ball joints that may have become smaller due to rust or wear.
⚠ Please ensure the part fits your vehicle before purchasing or downloading the model. Refunds cannot be provided if the model is incorrect for your application. Always confirm compatibility by comparing and measuring it against your original part.
Additional compatible models can be found in my other uploaded files.
Compatible original part numbers:
A0065428318
A2123200943
Compatible original part numbers:
Fits both the left and right side of the car.
Mercedes-Benz car models from
2009 up to 2017 in CLS-Class and
E-Class C218, W212
If you’re unable to print it yourself, you can also purchase a ready-made printed version — just send me a private message.
Parts: €20.00 each.
Shipping within the EU: €9.90–€14.90.