Wyniki wyszukiwania: suspension

Opel ASTRA H suspension cap

Shock absorber bolt cap Opel Astra H

Shower rod curtain suspension

The origineel was not strong , so I make a better one. 100% inlay , with support , but difficult to remove Drawing with Thinkercad closer to the sealing 46 mm Dimension 56 x 22 mm

Ninebot G30 Middle Pipe Front Suspension

Middle Pipe for Custom Ninebot G30 Front Suspension This part is currently in production. All CNC files are available for use. Required components: 1x DIN912 M4 6mm Compatible bolt sets are available on our Printables.

Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)

I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Used in various Mercedes-Benz car models from 2007 up to 2016 in E-Class C207, A207 and C-Class W204, S204. If you need…

Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)

I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…

Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)

I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…

Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)

Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or debris. When assembling, apply a generous amount of thick grease to the joints to ensure smooth movement and…

Mercedes Air Suspension Headlight Leveling Sensor Rod 11mm 10.5mm 10mm (3D Printable)

I can also ship ready-made, 3D-printed parts worldwide. Feel free to send me a private message for more information. Before installation, remove any rust by sanding the ball joints with approximately P240 grit, and clean off any dust or…

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

~5cc Volume Spacer for Fox Suspension Forks

Take suspension tuning to another level with half sized volume spacers. For best results, print it out of PETG or something that can flex a little bit. PLA may be a little too brittle. Print with 100% infill, clip on, have fun. If you are…

MK1/2/2.5 Miata/Mx5 suspension bushing mould

Wanted Polybush my mk1, but bush kit is extremley expensive, so went down the route of printing moulds and casting myself. Designed based of existing polybushes(borrowed of my friend and took dimensions). Printed in TPU95A, I would advise…

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

3D Printable Tennis Ball Bike Suspension Project

Tired of a harsh ride? Welcome to the "NeoBall Rocker 3B Tripod" – a quirky, functional, and completely 3D-printable bike suspension project! This isn't just another bracket; it's a clever rocker mechanism that uses a few humble tennis…

Brompton P/T Line Suspension Block Parts

Brompton P/T Line Suspension Block for replacement of damaged parts on P/T Line print rubber part with TPU with 70% infill print crossbar adapter plate wit PETG

Tamiya Frog updated rear suspension.

Moving this file set over from another site. So you may have seen this before. This is my take on a replacement rear suspension for the Tamiya Frog, either vintage or re-release. It gives full bearing support to the entire rear…

Extension de garde-boue pour protéger la suspension.

Extension de garde-boue pour protéger la suspension. Compatible avec Angwatt X1 2.0, Yume M14, Laotie SR10, Jager SP PRO, Zero 10X, Apollo PRO, Xtron X10 Pro…

Suspension hydraulique réglable KKE - Clé en C

Abbey SUSPENSION TOP CAP SOCKETS

Holder for Abbey suspension top cap sockets. I kept it flat with no Gridfinity pattern since I didn’t need the grid

suspension for mack granite (10cm)

suspension

AUDI A6 Allroad air suspension level detection rod support

Audi A6 allroad level detection rod support for 2013 year air suspension. Don't know if this works on other models also. With this fixed broken rod without need of change of component.

MODEKA riding gear vent panel replacement suspension pin

Náhradní závěsný pin pro fixaci ventilačních panelů u moto oblečení MODEKA (Panamericana a další). Pro úspěšný tisk je nutné přidat podpory pod horní klobouček. Pro spojení vrchního a spodního dílu při instalaci je doporučeno použít…

RC Car Suspension

This is a fully 3D-printable RC car suspension designed for easy, tool-free assembly. No adhesives are required—simply add a spring of your choice to complete the setup. The suspension offers up to 0.8 cm of travel.

Tenere 700 Rear Suspension Sag Measurement Tool

A tool I designed to help measure the rear sag of the Tenere 700. Slide it into your rear axle and either use some string in the hole at the back or put a tape measure in the slot and measure away. Please Note: The slot for the tape…

The Suspension Bridge of Construct

A customized 1:731 scale model of the Golden Gate Bridge, created as an educational civil engineering study. The project explores the working principles of suspension bridges, including load distribution, cable tension, tower support…

SUSPENSION ORIGAMI

Sublimez votre intérieur avec ce luminaire aux lignes fluides et organiques . Ce projet combine esthétisme architectural et ingénierie de précision pour un rendu professionnel après impression 3D. Points forts : Design fluide : Une forme…

LONGER SUSPENSION ARMS FOR HNR 9804

HNR9804 is quite good model, but really narrow. I made these to have 195mm width, depeding on rims and setup you use. These arms also changing the wheelbase to standard 256 mm. These suspension arms made by SLS PA12 (much stronger than…

Cube E-Bike front suspension AirTag

Needed an AirTag holder for my cube ebike, there wasn't as specific one for my e-bike: Cube Supreme Hybrid Deluxe One. Is a press fit into the front fork suspension.

RC Shark - Alternate Nose Gear Strut/Suspension

A re-working of the Nose Gear on the RC Shark. These pieces replace the "front gear lever" and the "front gear spring" of the standard design. The RC Shark model plane here on Thingiverse is great. https://www.thingiverse.com/make:524192…

Lego Compatible (32294.dat) Technic Suspension Arm 1 x 9 x 2.5

This model is compatible with the lego system.

Aufhängungshalter vorne für DT-03 / front suspension holder for DT-03

DE Beschreibung: Passend für das Tamiya DT-03 Chassis. Dazu gehören: Neo Fighter Buggy, Racing Fighter Buggy und Aqroshot. Ein Ersatzteil das dem Vorbild nachempfunden ist. EN Description: Fitting for the Tamiya DT-03 chassis. These…

Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2025]

Safety warning Do not use consumer-grade/desktop 3D-printing for this application unless you anneal the prints in an oven. Industrial grade 3D printing may be OK but Laser cutting or CNC milling HDPE plastic up to 12.5mm (1/2") is best.…

Replacing Mountain Bike Suspension Bearings with 3D Printed Tools

I used these tools to replace the 6 pairs of bearings in my mountain bike suspension. You can buy the specialised tools to do this but I wanted to see if it was possible using my own 3D printed tools. The rear suspension triangle started…

Uni-wheel - One Wheel Freestyle Finger Board - Compliant Suspension - Fidget Toy - New Sizes and Design

This is a complete redesign of my original “One Wheel Freestyle Fingerboard - Fidget Toy” that I designed about three years ago: Based on some comments, I decided to make the parts fit together better and to make available larger wheels.…

Mini suspension clip but this time it's good

Mini suspension clip but this time it's directly remixed from brianberger design on Thingiverse so it's actually good Reduced length from 40mm to 31mm for better use with small keys, keychain tools, small knives Hole is 2mm (a version…

Turbo Hopper / Jet Hopper front suspension / A-arm

I couldn't find any examples of these parts to 3d print for replacements. I modeled these for my early Turbo Hopper that uses 8 AA batteries and the narrow plate where the bumper screws into the vehicle but has the bigger diameter rear…

Associated tc4 Rear Suspension Lower Pivot

A rear diffuser and suspension link for the TC4 touring car. I made this in 2 parts so that each component could be modified and adjusted individually (make a body mount on the upper half later) this is lengthened so that it looks decent…

Brompton EZ Suspension Block Plate Replacement

replace broken EZ Suspension Block plate the plastic plate can break after some use print with PETG

IKEA Behjälplig Suspension (more durable)

I printed few parts from original author and I found that the tip is very fragile. I remixed it to be more durable. Enjoy

Inmotion V11 suspension shock cap replacement

A replacement for the original red shock cap. Modified the OEM design for more of a thumb-screw design, a bit easier to grip. This will thread on just like the original. It's a tight fit. None of the other replacements on this site were…

RC parts 1:10 suspension

2 versions 1. is same as original 2. is without lugs on the lock for greater strength (V 1.1)

BMW F700GS Suspension Adjustment Tool

Tool used to manually adjust the preload suspension on a 2015 BMW f700gs motorcycle. Print on its side (see pictures) using either PETG or PolyCarbonate (PC). 100% infilled and 5 shell layers. Will include BAMBU Studios config file.

Brompton & Trifold Bicycle Suspension Block - Multicolor

Brompton & trifold Rear Suspension Block replacement print the main suspension block with TPU with 70% infill density tested with rider of around 65kg with Inner Tube of 50% infill density tested with rider of around 85kg with Inner Tube…

Hinterradfederung, Dämpfer, Attrappe // Rear wheel suspension, damper, dummy

Hinterradfederung, Dämpfer, Attrappe Als Stütze für ausgetauschte Dämpfer, als Deko oder sonst was. Als Modell diente eine X Fusion o2 RL (Lochabstand 19cm) ______________________________ Rear wheel suspension, damper, dummy As a support…

XRC RC-2 Rear Suspension Top Arm Inner L/R - (Part no. 613007/XRC.613007)

This is a 3d printable replacement for the xrc rc-2s Rear Suspension Top Arm Inner L/R - (Part no. 613007/XRC.613007.) This isn't an exact 1 to 1 dimensionally accurate reproduction of the original part, this has been designed to be…

Full-suspension bike rear-rack anti-turn bracket

Anti-turn support for custom rear rack on suspension bicycle. (i dont like to use backpack on bicycle) Source files in zip if you need another seat post diameter. For rack you will need: Print Settings Rafts: No Supports: Yes…

udi1601 front left suspension arm

i made this model because my suspension arm cracked and was not able to use my car so yea its just a replacement

ECells suspension fork basket mount

This is the mount for the ECells bike with upgraded suspension fork. This is a mount for the basket and front headlight. 100% infill and ASA or PETG.

Begode Master Suspension Pipe Drilling Clamp Tool

You can just download and print it as is… Set the pipe flush, put it into a vice, and drill with a 4mm drill bit.

8045 Rear Lower Suspension Bracket Mount ZD Racing 9116 1/8 RC car

I Tried 3perimeters and 15 infill, will see how it holds Category: R/C Vehicles

Torsion bar rear suspension for 1/12 RC CAR

This is one of my proof of concept designs for the rear axle. (I'll be using a McPherson strut suspension for the front axle) First of all this is NOT the rear suspension of most of the current cars which is a torsion BEAM suspension (I…

Carson X-Crawlee suspension steering buckle

spare part new stronger version uploaded in addition.. . adopt if you like - FreeCAD file attached…

Trifold Brompton bicycle suspension block plate Mod

Mod Trifold/Brompton bicycle suspension block plate cover the rectangle block of the clamp printed in PETG

Halloween Skin for Brompton Suspension Block

Halloween Skin for Brompton Suspension block Print with TPU

Lego Compatible (47720.dat) Plate 2 x 2 with Wishbone Suspension Arms and Pins

This model is compatible with the lego system.

Rockshox Recon suspension fork top mudguard mount

The Rockshox Recon suspension fork doesn't have a top mounting hole for a mudguard. This adapter provides a way to mount a mudguard. It fits into the top bridge of the fork and is secured by zip ties. An M5 bolt, pushed through the…

Rockshox Recon suspension fork mudguard mounts

The Rockshox Recon suspension fork (and presumably many other Rockshox models) do not have mounting holes for mudguards. This adapter can be attached to the lower legs of the fork using zip ties to provide a way to mount a mudguard to the…

Casal Carina suspension cover (tampa da suspensão)

This is my model of the front suspension link cover for the Casal Carina scooter. It fits the early models, with only one shock. Later models had a separate spring and shock absorber, and this cover will not fit them. I did not have an…

Mountain Bike Suspension Sag Ruler

Simplify mountain bike suspension setup with the Suspension Sag Ruler, a precision tool for sag measurement. This ruler makes setup easy for shocks and forks that don't have sag measurements printed on them. Features: Millimeter Markings:…

IKEA TJUSIG Hat Suspension System

Transform Your Space with my Brackets for the IKEA TJUSIG Coat Rack! Enhance your space organization: Say goodbye to clutter and hello to convenience! My innovative brackets are designed to create a suspended section for hats, making the…

DURASS Brompton Trifold Suspension Block

DURASS Brompton Trifold Suspension Block Durable 2 parts suspension block print with TPU 70percent infill for mid stiff, 100 percent infill for hard stiffness

TRAXXAS 7630 Suspension Arm - FDM Optimized

TRAXXIS 7630 Suspension Arm revised to be easily printable on an FDM printer. Use your slicer to mirror as needed. Mirroring is only needed for visual preference. An Index drill set will be useful to cleanout the printed bores.

Birdy Front Suspension Tube Insert

custom made 3d print Birdy front suspension insert to make it stiffer, removable whenever you need the original softer feel made from TPU print with 0% fill

simplest mini4wd double wishbone suspension

So I can't help noticing someone hasn't already made a 3D printed version of DHS suspension for MS chassis….I mean people been doing these mods for over 20 years, but mostly Tamiya spec mods that are both time and money consuming to make.…

Trophy Truck V4.1 update package 1: rear suspension

A updated, better looking rear suspension for the Trophy Truck V4. It also is more sturdy and saves 50g of weight.

Suspension Pocket Clip Pin

Remix using Key Suspension Pocket Clip from Matticus Finch

Opel ASTRA H suspension cap

Shock absorber bolt cap Opel Astra H

Birdy Kamoya Suspension TPU Bumper

replacement part for Birdy bike Kamoya rear suspension made of TPU adjust the stiffness by changing the infill density

Grandfather Clock Pendulum Suspension Spring Clamp

This part clamps the pendulum spring to the pendulum rod holder. Printed two of the model. Requires 4 nuts and bolts - I used #8-32 nuts and #8x1/2" screws. After installing this part, the clock has been running for 24 hours. You can read…

Hanger for suspension models Elegoo Mercury X/XS Wash&Cure Machine

A collapsible compact hanger rack that fits into the base of a transparent disk. It does not interfere with the operation of the device and does not take up much space. If necessary, take it out and assemble it in a couple of minutes. It…

PreSonus Eris 4.5 suspension brackets

This is a simple solution to hang your Presonus Eris 4.5 monitors. It makes sense if: 1. you need space on your desk and have something to hang them from (or are willing to hang them from the ceiling). 2. you want your old monitors to…

KuKirin G2 Master suspension wrench

There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…

Lamp suspension

Not for a rope, but for a wire

Washing Machine Suspension Bush

Washing Machine Suspension Bush Best Result in Print With 0.2mm Layer Height

Suspension spare parts for Kyosho Lazer ZX-5

A friend of mine broke his front suspension when he hit a rock. I had to print a couple of parts. Since he lost the steel axle too and I only had a 2mm axle at home I printed a bushing for it. Blue parts are ASA. Bushing printed with TPU.

A-arm suspension for The Marmot rc car

A-arm type rear suspension for The Marmot - https://www.printables.com/model/1149568-the-marmot-110-scale-off-road-buggy Instead of the swing axle type suspension included in The Marmot, this type uses the same a-arms as the front of the…

Parametric Out of Marbles Bucket Tower Suspension Shelf

Motivation I printed and assembled a seven module Out of Marbles Bucket Tower years ago and we occasionally enjoyed playing with it, but it always seemed to be in the way when sitting on my desktop. It would constantly get jostled and…

Tesla Cybertruck with suspension, without supports

Soo this is the Tesla Cybertruck with suspension, without supports really easy to print hope you like the suspension.

Santa Cruz M6 tapered washer for full suspension mountain bike linkage

Santa Cruz M6 tapered washer for full suspension mountain bike linkage. Fits my Santa Cruz Bronson V3 and should fit other Santa Cruz bikes. Part #26-15633

OpenRC F1 Suspension Mod - Shorter Swing Arms & Wheel Hub

Shorter swing arms for shorter wheel base, I didn't like how wide the front wheels were, and how far they were from the fender/wheelwell. Print thick, many walls, petg, strong print, good happy rc times.

Parametric Suspension Shelf

Motivation This is a slight remix of my Parametric Out of Marbles Bucket Tower Suspension Shelf design that can be used as a shelf for anything. I thought it was unique enough that others might enjoy it as well. Solution This design has…

Body Suspension Key Rings

A collection of miniature scale body suspension rig plates, for use as keyrings

Suspension Fork Sag ring clip

Suspension fork missing sag O-ring? Avoid the hassle of removing the lower legs just to install a new one - just print this and snap it on! Select the file with the size for your stanchion diameter (size down if in between sizes). Print…

Meross Smart Garage Door Sensor Cable Riser/Cable Suspension Mount

I recently purchased a Meross (MSG100) smart garage door opener and realized after I started the installation that my garage door chain track doesn't have any type of cover to mount the door sensor cable to. The thought for this is to…

Formula 1 McLaren MP4/4 - Front Suspension

I guess the original model it's too difficult to assemble the front wheels. I made a model that requires printing 4 parts: 2 units x MP4_4_Rim 1 unit x MP4_4_Suspension_fl 1 unit x MP4_4_Suspension_fr I made an improvement to…

Smiley Lego Head Trifold bike Suspension Block Skin

Skin for Trifold bike suspension block add fun to the dull suspension block

Suction cup shelf with suspension holes

I wanted to increase the strength and security of the @Madcamper/@rebeltaz design using suspension support. My plans for the shelf would ensure a great mess entails if the shelving bracket should fail. Thus I wanted to “over-engineer” it…

Motor suspensions spacers for Pioneer turntable C4500 and PL-12D

The Pioneer turntables C4500 and PL-12D 3 have 3 rubber suspensions that support the motor. They can dry out, which makes the motor vibrations audible through the chassis and cartridge. By using these spacers, you can compensate for the…

Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover

Ford Fiesta MK5 Suspension top strut mount & bearing Cup/Cover For Ford Fiesta MK5 facelift (2004-2008) Left and Right version (Different) Print Settings Supports: Doesn't Matter Resolution: 200µ Infill: Min. 50% Filament: ABS/PETG/ASA

Mavic3 Camera suspension

It is advisable to print on a photopolymer printer. I would really appreciate it if you like it, thank you.

Suspension-Steering for Thule Jog Kit

Mounted between the wheel axle and the two “arms”, this adapter should fit single and double Thule chariot (not the newest above 2025 ones) jog kits. Printing: You'll need to mirror the CAD in you slicer, as these only work in pair!…

Desk light mount suspension

After printing this my productivity has massively increased desk work has become easier as there are no shadows created. This design enables users to secure their light high above their working space. No skews/glue/assembly REQUIREMENTS…

Suspension Bushings Pill-box ASSO RC8B4

As this was requested more then once, I made a new version of a previous model (intended for the Team Xray XB8-buggy) for the Team associated buggy. The RC8B4….-buggy uses two different sizes of "pills. Both can be stored in this box. :D…

Tesla MY TEIN suspension front upper cap

With the TEIN damper in the front the original TESLA rubber caps do not fit anymore in the front. So designed this cap. It consists of two parts as the dome is open to the side. The cap is printed in TPU95 with 30% filling. It is slightly…

Birdy Kamoya front suspension rubber

Birdy Kamoya Front Suspension rubber replacement

Lego Compatible (57515.dat) Technic Suspension Arm 2 x 6

This model is compatible with the lego system.

Begode Falcon Suspension Cover - Station68

Designed to keep debris out of the suspension, this cover prints without supports, and snaps in place without any hardware! You can even add Velcro over it for additional pad real-estate on your wheel. I printed mine in PETG, all walls.

Door Suspension Hanger

Description Door hanger designed for top-of-door installation. The hanger is 100 mm long and features a 4 mm wall thickness. It comes in two variants to fit doors that are either 35 mm or 44 mm thick. Printed mine with 4 walls, 30%…

Reely Stoßdämpferteller Suspension Spring Retainer

Front suspension spring retainer ring for a Reely 12895 Himoto Tanto type RC car. Haltescheibe für die Feder am vorderen Stößdämpfer eines Reely 12895 Himoto Tanto Fernsteuerautos. Post-Printing As there is a slight overhang, it might be…

Tamiya XV-01 Suspension Mount (JJ3)

držák nápravy na podvozek XV-01

suspension arm for toy

PETG with support