1 / 4
Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2026] — zdjęcie 1
1 / 4

Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2026]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

[UPDATED November 2026] Various spacers to raise Subaru suspensions

Ocena
5 / 5
Polubienia
39
Pobrania
290
Wydruki
1
Wyświetlenia
1385
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Safety warning

Do not use consumer-grade/desktop 3D-printing for this application unless you anneal the prints in an oven and even then, don't go beyond 6mm thick. Laser cutting or CNC milling HDPE plastic up to 12.5mm (1/2") is OK. Anything thicker than ought to be milled steel or aluminum from a service like https://www.sendcutsend.com.

Introduction

Just a few Subaru suspension spacers you can use to make part of a lift kit or fix a saggy rear-end. You don't need to spend hundreds on Amazon for a lift kit anymore! In general, spacers up to ~6mm (1/4") do not need longer studs to be installed between the strut top and chassis.  For anything thicker, you'll probably need to install longer studs or switch to aftermarket strut tops.

Mount styles

(A) Rear 2-stud (Legacy/Outback/Baja 2000-2009)

Dimensions:

  • stud spacing: 110mm

  • central hole: 65mm

  • stud size: M10

Fits:

  • Baja 2003-2006

  • Legacy/Outback 2000-2009

(B) Rear 3-stud (Legacy/Outback 1995-1999, Impreza 2002-2007, etc.)

Dimensions:

  • Stud spacing: 107mm and 98mm (isosceles triangle)

  • Central hole: 85mm

  • Stud size: M8

Fits:

  • Forester 1998-2002

  • Impreza 2002-2003

  • Legacy/Outback 1995-1999

  • Probably fits:

    • Forester 2003-2008

    • Impreza 2004-2007

    • Saab 9-2X 2005-2006

    • STI 2004-2007

    • WRX 2002-2007

(C) Front 3-stud smaller (Impreza, BRZ, FRS, GR86, etc.)

Dimensions:

  • Stud PCD: 140mm

  • Central hole: 110mm

  • Stud size: M8

Fits:

  • Baja 2003-2006

  • BRZ/Scion FR-S/Toyota 86/GR86 2013-2025

  • Forester 1998-2008

  • Impreza 1993-2007

  • Legacy/Outback 1990-2004

  • Saab 9-2X 2005-2006

  • Probably fits:

    • Outback 2010-2019

(D) Front 3-stud larger (Legacy/Outback 2005-2009, WRX, STI, etc.)

Dimensions:

  • Stud PCD: 155mm

  • Central hole: 124mm

  • Stud size: M8

Fits:

  • B9 Tribeca/Tribeca 2006-2014

  • Crosstrek/ XV Crosstrek 2013-2017

  • Forester 2009-2018

  • Impreza 2008-2016

  • Impreza R 2009-2012

  • Impreza Sport 2008-2011

  • Legacy/Outback 2005-2009

  • STI 2014-2022

  • WRX 2014-2022

  • Probably fits:

    • STI 2008-2013

    • WRX 2008-2013

(E) Rear 2-stud larger (2008-2019 various)

Dimensions:

  • stud spacing: 130mm

  • central hole: 90mm

  • stud size: M10

Fits:

  • BRZ/Scion FRS/Toyota 86 2013-2019

  • Crosstrek/ XV Crosstrek 2013-2017

  • Forester 2009-2018

  • Impreza 2008-2015

  • Impreza R 2008-2015

  • Impreza Sport 2008-2011

  • Legacy/Outback 2013-2014

  • WRX 2015

  • Probably fits:

    • Ascent 2019+

    • Legacy/Outback 2010-2012

Todo

I need photos/measurements to design additional spacers:

  • stud diameter (typically 12mm or 14mm)

  • distance between studs (center to center in mm)

  • diameter of central circle/oval that houses bearing or fits into strut turret

  • any other external measurements

  • top-down photo

1990s rear 3-stud style
  • Legacy 1992-1994

  • Impreza 1993-2001

2018+ rear 2-stud style

Allegedly the sizing is slightly different than the (E) style

  • Crosstrek 2018-2024

  • Forester 2019-2024

  • Impreza 2017-2024

  • Legacy/Outback 2020-2024

  • WRX 2022-2024

2017+ front 3-stud style
  • Ascent 2019-2021

  • Crosstrek 2018+

  • Impreza 2017-2020

  • Forester 2019+

  • Legacy/Outback 2020

Tagi