1 / 4
Tamiya "The Fox" RC car front suspension arms (1985)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These were designed to replace the front arms on the Tamiya Fox Radio controlled car / buggy.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 1174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (15)Powiązane
A 1:1 replacement for the front suspension arms on the Tamiya Fox buggy.
Printed at 0.2mm on the Creality Ender 3
100% infill
I used PLA, but you can experiment to see if other materials make it stronger.