1 / 3
Double Suspension Bridge for Wooden Train Tracks (flat / countersunk head bolts)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original model, which now allows you to use M4 countersunk head bolts
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (47)Powiązane
I really liked design of the original model, but had a lot of unused M4 bolts with countersunk head, so I made minor change in design of the original holes. Also created new connecting spacer, because original did not have thread inside and hole was too big for securing M4 bolt.
You will need 20 M4 flat / countersunk head bolts of length ranging between 12 to 22 mm