1 / 20
LDR/C LD-P06 Unimog U1300 RC Truck Dig Gearbox and 4-link Suspension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files for gear box with 10% overdrive and dig property + 4-link suspension
- Ocena
- 0 / 5
- Polubienia
- 75
- Pobrania
- 335
- Wydruki
- 0
- Wyświetlenia
- 4982
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (27)Wydruki i komentarze (Wydruki: 0) (Komentarze: 10)Remiksy (0)Kolekcje (56)Powiązane
Files for gear box with 10% overdrive and dig property + 4-link suspension
Needed Parts:
- Coil over shocks for WPL (I have used these which have a decent stroke of 17mm https://www.aliexpress.com/item/1005004287715717.html)
- 16pcs 4mm ball head screws for Wltoys 959 (https://www.aliexpress.com/item/1005004822044692.html)
- 4pcs philips head screw M2x16mm
- 15pcs philips head screw M2x6mm
- 5pcs philips head screw M2x12mm
- 1pc M2 nut
- Steele rod diameter 3mm length 29mm
- Steele rod diameter 3mm length 35mm
- CA glue (for attaching gear shifter fork to the rod, shaft key to the rod and main spur to the reduction pinion)
I didn't have time for a detailed documentation but included photos and exploded view for the gearbox. Hope it would be helpful.
Printed the suspension links with flex filament (filament had poor quality and ended up with terrible surface quality). Other parts were printed either with PLA or ABS.
4mm rods and bushings are used from the original gear box.