Bikepacking suspension bottle cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry 1L of extra water on this ultra rigid bottle cage, perfect for long trips where the last drop of H2O is essential
- Ocena
- 0 / 5
- Polubienia
- 61
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 2560
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bottle cage will fit any Nalgene 1L (32 oz) water bottle, it goes on the suspension fork and will fit a FOX 34 or any 41mm diameter lowers suspension.
The bottle cage requires 3 printed parts, it was printed in nylon with 35% infill and 2 contours, it seems sturdy enough to handle a full water bottle with no problem, but you can add more infill or contours if you'd like. I dropped my bike from 0.5m and the bottle didn't come out of the cage.
Hardware required:
- 4 M4-0.7 x 16mm screws (one for the stop and three for the clamp)
- 3 M4 nuts (for the clamp)
- 2.3mm steel rod (you can get it from a thick paper clip or a welding rod, this is for hinge mechanism)
Check out my other bikepacking design
https://www.prusaprinters.org/prints/135055-bikepacking-handlebar-bag-straps