Bikepacking suspension bottle cage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Carry 1L of extra water on this ultra rigid bottle cage, perfect for long trips where the last drop of H2O is essential
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 117
- Makes
- 0
- Views
- 2,560
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bottle cage will fit any Nalgene 1L (32 oz) water bottle, it goes on the suspension fork and will fit a FOX 34 or any 41mm diameter lowers suspension.
The bottle cage requires 3 printed parts, it was printed in nylon with 35% infill and 2 contours, it seems sturdy enough to handle a full water bottle with no problem, but you can add more infill or contours if you'd like. I dropped my bike from 0.5m and the bottle didn't come out of the cage.
Hardware required:
- 4 M4-0.7 x 16mm screws (one for the stop and three for the clamp)
- 3 M4 nuts (for the clamp)
- 2.3mm steel rod (you can get it from a thick paper clip or a welding rod, this is for hinge mechanism)
Check out my other bikepacking design
https://www.prusaprinters.org/prints/135055-bikepacking-handlebar-bag-straps