1 / 7
Advanced motor frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've made this model to make the motor's wiring easier, increase cooling and most of all, to comply with looser…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
I've made this model to make the motor's wiring easier, increase cooling and most of all, to comply with looser tolerance parts. I bought my T motors of AliExpress and they didn't fit the original model, so i cut some holes and cleaned up the geometry, making the motor frames very tolerant
Changes:
- both files have gotten the improved cut-outs
- the AV one has gotten a track tensioner/raiser, while the AVNT variant does not (NT=non-tensioned)
Configurations:
- 2 AVNT for a slick design, has low ground clearance
- 1 AVNT, 1 AV (recommended) for a raised and practical design. The tensioner also works as a raiser, giving it more ground clearance, and a higher stance.
- 2 AV gives the tank an interesting shape, similar to the British MK1. However, if you're using this for the tension, then you've got bigger problems
Mounting hardware:
- 4x M3x30 screws. Longer screws work (I'm using M3x40 bolts in the photos)
- 4x M3 nuts. The nut type is up to preference
- 1x M4x30 or longer, depending on your mounting method