1 / 7
Advanced motor frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've made this model to make the motor's wiring easier, increase cooling and most of all, to comply with looser…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 12
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
I've made this model to make the motor's wiring easier, increase cooling and most of all, to comply with looser tolerance parts. I bought my T motors of AliExpress and they didn't fit the original model, so i cut some holes and cleaned up the geometry, making the motor frames very tolerant
Changes:
- both files have gotten the improved cut-outs
- the AV one has gotten a track tensioner/raiser, while the AVNT variant does not (NT=non-tensioned)
Configurations:
- 2 AVNT for a slick design, has low ground clearance
- 1 AVNT, 1 AV (recommended) for a raised and practical design. The tensioner also works as a raiser, giving it more ground clearance, and a higher stance.
- 2 AV gives the tank an interesting shape, similar to the British MK1. However, if you're using this for the tension, then you've got bigger problems
Mounting hardware:
- 4x M3x30 screws. Longer screws work (I'm using M3x40 bolts in the photos)
- 4x M3 nuts. The nut type is up to preference
- 1x M4x30 or longer, depending on your mounting method