1 / 1
T-Slot nut M4 with TPU spring to fix parts e.g. to a workbench
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The T-Slot nut is suitable for rails 30x30 and a width of 8mm.
To ensure T-Slot nut is fixed also in vertical position, I have designed a TPU spring which is fixed to main body by a dovetail groove.
I recommend to use a TPU with a low shore hardness. For my part I have used colorfabb varioshore with a setting to get a shore hardness below 85A. After printing, add a nut M4 to the printed part.
To assign the different materials to the T-Slot nut, you have to split the .stl into parts in your slicer.
Due to the dovetail groove, the T-Slot nut is printed on a Prusa-XL. I guess with an MMU it will also work.