1 / 1
Pimp my Two Trees Laser TT2.5 / TT5.5 with drag chain — zdjęcie 1

Pimp my Two Trees Laser TT2.5 / TT5.5 with drag chain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two Trees Laser came without any cable guide solution. I wanted a clean setup thus added drag chain on all axis.

Ocena
5 / 5
Polubienia
23
Pobrania
172
Wydruki
2
Wyświetlenia
2051
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Drag chain credits goes to https://www.prusaprinters.org/prints/40345-fully-parametric-drag-chain 

Drag chain end stop credits goes to https://www.prusaprinters.org/prints/104140-end-connectors-for-the-fully-parametric-drag-chain

 

I printed all chain mounts in PETG 100% @0,2 layer height infill with support whenever required.

Chain links printed with default settings @0,2 layer height no support.

I don't think PETG is mandatory but that's all I had in stock.

Second Y axis mount has to be mirrored from the first one.

You will need 

  • 3 longer bolts to achieve construction : M5 x 20 mm
  • zip ties
  • 1,5 m X motor axis cable and laser cable (or you can extend the one that came with your machine)
  • 1m Y motor axis cable
  • optional: 2 end stops + bolts & nuts

Created with fusion 360 and openscad for drag chain customizer.

Don't hesitate to comment or ask you questions.

Tagi