Pimp my Two Trees Laser TT2.5 / TT5.5 with drag chain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two Trees Laser came without any cable guide solution. I wanted a clean setup thus added drag chain on all axis.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 172
- Makes
- 2
- Views
- 2,059
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Drag chain credits goes to https://www.prusaprinters.org/prints/40345-fully-parametric-drag-chain
Drag chain end stop credits goes to https://www.prusaprinters.org/prints/104140-end-connectors-for-the-fully-parametric-drag-chain
I printed all chain mounts in PETG 100% @0,2 layer height infill with support whenever required.
Chain links printed with default settings @0,2 layer height no support.
I don't think PETG is mandatory but that's all I had in stock.
Second Y axis mount has to be mirrored from the first one.
You will need
- 3 longer bolts to achieve construction : M5 x 20 mm
- zip ties
- 1,5 m X motor axis cable and laser cable (or you can extend the one that came with your machine)
- 1m Y motor axis cable
- optional: 2 end stops + bolts & nuts
Created with fusion 360 and openscad for drag chain customizer.
Don't hesitate to comment or ask you questions.