Gaslands Death Race compact flat gates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small, takes up very little space. Readable right after printing, can be colored in-printer or painted.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
As much as I love all the designs on the internet for gaslands racing gates, they take up a lot of space. I wanted to create a set of “gates” (well, more like racing lines I guess) that were simple to print, readable right after printing, could be coloured with a single extruder filament swap, but was still flat enough to be painted. So here they are.
They're 2mm shorter than the official rules state (182mm long, just like the Long driving template) but this lets it fit on a Prusa Mini without having to print diagonally. This way if you have a Mini you can print about 6 of them in one sitting (1 start, 4 checkpoints, 1 finish) instead of having to break it up. I figured Gaslands' rules are casual enough with measurements that 2mm would be forgiven.